As title suggests I am changing motors, im am looking at putting a factory GU intercooled turbo (TD6?) into my GQ that currently has a TD42 .
Are there any wiring differences between these motors, ie fuel pumps that I need to be aware of.
I know there are some differences with plumbing, particularly air intake, but they I think that will be manageable.
GU motor is complete except for starter motor and possibly alternator
Any assistance appreciated
Cheers
Brad
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU motor into GQ (diesels)
The alt should not be a hard thing. As there is no vacuum pump on the GU alt. Startd should be the same.
But what may be a problem is that the injector pump has a small electronic bit on it. Where as the GQ dosent have this bit.
Other than that, you may need to check the engine mounts. Cos if your truck is and earlie model GQ they only had 2bolt engine mounts later ones and am guessing the GU's are the same had a 4 bolt mount.
But what may be a problem is that the injector pump has a small electronic bit on it. Where as the GQ dosent have this bit.
Other than that, you may need to check the engine mounts. Cos if your truck is and earlie model GQ they only had 2bolt engine mounts later ones and am guessing the GU's are the same had a 4 bolt mount.
THOUGHT FOR THE DAY....
But what may be a problem is that the injector pump has a small electronic bit on it. Where as the GQ dosent have this bit.
Other than that, you may need to check the engine mounts. Cos if your truck is and earlie model GQ they only had 2bolt engine mounts later ones and am guessing the GU's are the same had a 4 bolt mount.
I have a single pin plug on the back of my current fuel pump and this appears to be the same on the GU
I have a 96 GQ so should be OK with engine mounts
I am also suspicous that my current engine may be out of a GU as I have the different rear main seal
TD42T Motor change
We just did this in the shorty but without the intercooler and we kept our Safari Turbo.
Alternator was easy, starter motor same, we fitted a new clutch at same time. Yeh Rear main was different.
The fuel pumps vary dramatically - evidently Nissan were trying to improve emissions. The new pump will have the aneroid but it didnt complicate things for us at all.
Yes we had to change engine mounts at the last minute. Had a set tho.
New motor = and we've only just begun. Torque plus!
Peter
Alternator was easy, starter motor same, we fitted a new clutch at same time. Yeh Rear main was different.
The fuel pumps vary dramatically - evidently Nissan were trying to improve emissions. The new pump will have the aneroid but it didnt complicate things for us at all.
Yes we had to change engine mounts at the last minute. Had a set tho.
New motor = and we've only just begun. Torque plus!
Peter
_________________
Old Fart Ex Competitor with bits to spare
Old Fart Ex Competitor with bits to spare
Who is online
Users browsing this forum: No registered users and 4 guests