Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suzuki body swap
suzuki body swap
I was wondering if some one can help me i have a lj80 soft top and it is damaged and wondering if there is an other body that will fit on the the lj 80 frame.cheers mick
this may help?
I believe the sierra body is wider than the LJ.
Some people fit LJ bodies to Sierras, because the are much narrower.
Any thing can be done with lots of money, or time, or effort, or all 3.
christover
I believe the sierra body is wider than the LJ.
Some people fit LJ bodies to Sierras, because the are much narrower.
Any thing can be done with lots of money, or time, or effort, or all 3.
christover
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
There doesn't seem to be any practical way to get a sierra body onto a lj chassis. I'm sure it is possible, just more work than it would be worth. I woulld just try and find another LJ tub to swap if it was me.
PS I hate freaks (car body on 4Xchassis) evey one I have ever seen has been hack, and less useful than the original car in both cases. Most cars have very little "drop" in the centre of the chassis - i.e they are very flat front to back so the car body ends up very high on the chassis.- bad for CoG. Also, monocoque car bodies are far heavier than you need if you have a separate chassis so the end result is a much heavier car than original - again pretty dumb.
From a design viewpoint, most cars have much smaller doors, "fast" windscreens (laid back) and lots of other details that make them less useful as 4X4's - poorer visiblity, more complex to repair etc.
PS I hate freaks (car body on 4Xchassis) evey one I have ever seen has been hack, and less useful than the original car in both cases. Most cars have very little "drop" in the centre of the chassis - i.e they are very flat front to back so the car body ends up very high on the chassis.- bad for CoG. Also, monocoque car bodies are far heavier than you need if you have a separate chassis so the end result is a much heavier car than original - again pretty dumb.
From a design viewpoint, most cars have much smaller doors, "fast" windscreens (laid back) and lots of other details that make them less useful as 4X4's - poorer visiblity, more complex to repair etc.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
this may not mater due to the early year of manufacture of the lj 80 but when i cheked out the legalitys of a body swap with a WA pits i was told that the new body must meet the regs for the chassys year of manufacture e.g. all those little safty requierments that change every year. thing like seatbelt mounts and position of indicators (maby even emisions control laws) but agen this is for WA and this only apliyes if u tell mister plod.
Who is online
Users browsing this forum: No registered users and 0 guests