Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux diff

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 201
Joined: Sun Apr 03, 2005 1:36 pm
Location: S/E melbourne

hilux diff

Post by lux kid »

ive just blown me rear diff in me 2.8 hilux. is there a stronger centre\ whole diff i can use? like out of a bundera. or is it best to laminate and lock it. i run 35" in simex.
getting HALF CUT ready for mudbash 09.
hold on to your hats boys and girls.
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

Bundera is the same size "diff" as a hilux...

What did u blow? axle, CW&P, hemisphere... Hilux rear's are normally pretty strong and should take 35's...

Plenty of people run Hilux axles in comp rigs with larger than 35's... RUFF - 36" TSL's, POS - 38" claws, Guts - 36" TSL's etc etc...


Probably best to run stronger axles and an air locker... or start looking at axle swaps if your real keen...
Cheers,
Dan.

[i]1996 HDJ80R[/i]
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

Search for a 4 pinion centre and start from there, locker, a diff gear change (4.88's or more) and have it set up by a good diff shop.
What has let go with yours ?
The Hilux diff can be made to handle good power but I've managed to destroy a few in mine as well :twisted: . It all depends on how you apply the right foot :D
I'm thinking of slotting in a ford 9" to the rear of mine though as its about to get an extra 4 cylinders in the front :armsup:
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
User avatar
Pal
Posts: 152
Joined: Sun Nov 10, 2002 7:14 pm
Location: Sydney

Post by Pal »

Run an ARB then all you will blow is the crown wheel and or pinion from time to time. :D
Keep it simple
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests