How much will I have to drop the front crossmember when I chuck my SAS in the lux with Gonads made (ABT/M+M eng) Hi steer?
Will I get away with a 1 or 1.5" drop instead of the standard issue 2 inch dropped crossmember?
Am trying to not lift the lux too high!
I allready have a 40mm body lift which has to stay as I have lifted the drivetrain 40mm.
Also the bigest tyres I plan to run are 36s so with the front diff moved forward a bit I shouldnt need much lift.
In WA the max lift with engineers aproval and lanechage test etc is 6" - Including lift from bigger tyres!!!
So with 35s and nearly 2" BL I will be getting close with springs and dropped crossmember!
Paul.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How much drop on front crossmember for SAS with Histeer?
Moderators: toaddog, Elmo, DUDELUX
How much drop on front crossmember for SAS with Histeer?
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
hav u already bought the high steer? if not maybe get ORI cross ova. dont need to drop front x member at all. i had tha same issue with not wantin extra height and that was tha best way around it. and if ya really keen on high steer maybe PM guts, coz i think he ran snake high steer without droppin the x member 
You could probably get away without a drop cross member, but may have to limit up travel so nothing rubs.
Have you got approval for the hysteer or the lift?? I have been waiting 10 week so far, the DPI are very slow. I would get pre-approval before even buying anthing because things may be changing again. The current regulations of 6" max lift is only in draft format and my change when it is finally released
Chris.
Have you got approval for the hysteer or the lift?? I have been waiting 10 week so far, the DPI are very slow. I would get pre-approval before even buying anthing because things may be changing again. The current regulations of 6" max lift is only in draft format and my change when it is finally released
Chris.
I havnt got pre-approval yet 
I have been told they havnt been pre-aproving lately anyway (as you have found out).
I am thinking of just saying fark it and just doing the mods (to a high standard) and just worrying about all the legal sh!t later.
I know its probably not the smartest thing but Im sick of all the crap.
Paul.
I have been told they havnt been pre-aproving lately anyway (as you have found out).
I am thinking of just saying fark it and just doing the mods (to a high standard) and just worrying about all the legal sh!t later.
I know its probably not the smartest thing but Im sick of all the crap.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
ausyota wrote:I havnt got pre-approval yet
I have been told they havnt been pre-aproving lately anyway (as you have found out).
I am thinking of just saying fark it and just doing the mods (to a high standard) and just worrying about all the legal sh!t later.
I know its probably not the smartest thing but Im sick of all the crap.
Paul.
Yea things really suck in WA. I think as long as you do things to a high standard you should be alright. Just don't get in a car acident or you will be fcuked
No insurance!
Chris
Last edited by cbr on Sun Apr 24, 2005 10:37 pm, edited 1 time in total.
Just found this on pirate http://www.pirate4x4.com/forum/showpost.php?p=3193594&postcount=30 this guy is running standard hangers and x-over.
cbr wrote: Just don't get in a car acident or you will be fcuked
I know, that is the only worry. Well that and the local cops down here whos favorite passtime is stickering.
Well I probably allready have no insurance anyway with 33s, 40mm body lift, extended rear shackles, drivetrain lift, modified shockie mountings, etc etc.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
cbr wrote:Just found this on pirate http://www.pirate4x4.com/forum/showpost.php?p=3193594&postcount=30 this guy is running standard hangers and x-over.
isnt this Hi steer, and not x/o steer
diesel028 wrote:cbr wrote:Just found this on pirate http://www.pirate4x4.com/forum/showpost.php?p=3193594&postcount=30 this guy is running standard hangers and x-over.
isnt this Hi steer, and not x/o steer
its both.. hi steer cause the arms are above the springs, and cross over cause it goes left to right.. sumthin like that anyhoo
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
$POA
WANTED: hilux crawler transfer gears
Slayer wrote:diesel028 wrote:cbr wrote:Just found this on pirate http://www.pirate4x4.com/forum/showpost.php?p=3193594&postcount=30 this guy is running standard hangers and x-over.
isnt this Hi steer, and not x/o steer
its both.. hi steer cause the arms are above the springs, and cross over cause it goes left to right.. sumthin like that anyhoo
Yer, but isnt x/o when the tie rod stays beneath the leaf pack?
Still breeds the same result wether the draglink is below or above the springs, just that one is better protected than the other. They are both X-over by rights, but that photo is high-steer.
Guts runs an 80 series pitman arm of the box and seems to not have any drama whatsoever with it hitting the spring.
Guts runs an 80 series pitman arm of the box and seems to not have any drama whatsoever with it hitting the spring.
\m/
diesel028 wrote:Slayer wrote:diesel028 wrote:cbr wrote:Just found this on pirate http://www.pirate4x4.com/forum/showpost.php?p=3193594&postcount=30 this guy is running standard hangers and x-over.
isnt this Hi steer, and not x/o steer
its both.. hi steer cause the arms are above the springs, and cross over cause it goes left to right.. sumthin like that anyhoo
Yer, but isnt x/o when the tie rod stays beneath the leaf pack?
doesnt matter really.. soon as u go to left to right action steering rather than push pull it becomes cross over,
plain cross over using the double arm on the passanger side keeps the tierod in the stock position,
or if u move them above the springs its highsteer cross over
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
$POA
WANTED: hilux crawler transfer gears
Who is online
Users browsing this forum: No registered users and 4 guests