Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
M8000 control box to winch?
Moderator: -Scott-
M8000 control box to winch?
anyone out there know which cables go where please? i have three bolts on winch which say F1, F2 and whats looks to be an A! i have no idea where they hook up! help please?
check out this link http://www.pirate4x4.com/tech/billavista/8274/ at the bottom of the page the diagram should help < as long as your control box has the same solenoids , just conect your F1 to A
F2 to B
A to C
If winch operates in wrong direction just swap F1 and F2 to change direction .
hope this helps cheers Scott,
F2 to B
A to C
If winch operates in wrong direction just swap F1 and F2 to change direction .
hope this helps cheers Scott,
Who is online
Users browsing this forum: No registered users and 1 guest