Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need info on snake racings mog joints

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 130
Joined: Mon Jul 21, 2003 7:43 pm
Location: Gosford, NSW

need info on snake racings mog joints

Post by TOY-08V »

hey guys, im after any info on those mog joints that snake racing sell, im mainly after sizes and measurements, but any info would help, thanx guys.

keep wheeling. DAN
You do not have the required permissions to view the files attached to this post.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

Ring Snake Racing :roll:
Top
Posts: 294
Joined: Tue Feb 03, 2004 8:59 pm
Location: sydney

joints

Post by MUD80D »

or try Glen from
http://www.dobbinengineering.com/
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

A lot of guys don't use them for both ends of the control arms because if you have a bit of a knock on something with the arm the joints don't have any give and it has a harsh ride. So they use a combo of rubber at one end and mogs at the other. ;)
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest