Hi I got a price for $75 each for Model 126 steering arms. I have searched the topic but couldnt understand it completely. Do I need one or two steering arms. Is it that you only need 1 if you want cross-over steering but two if you want high steer?
Thanks
Jason
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
High Steer - Mercedes Arms
High Steer - Mercedes Arms
Win if you can, Loose if you must, but never give up !!!!
Re: High Steer - Mercedes Arms
you already have crossover steering 
1 will move your drag link higher (you need to mod your drag link end)
2 will move your tie rod higher (need new tie rod and modded drag link)
haggle harder. i got one for $20 but i have no idea where it is now since i didn't install it.
1 will move your drag link higher (you need to mod your drag link end)
2 will move your tie rod higher (need new tie rod and modded drag link)
haggle harder. i got one for $20 but i have no idea where it is now since i didn't install it.
Cant remember
Hey
Call me stupid but I can picture a sierra steering setup in my head. What side steering arm off a merc do I need to fit 1 to a sierra.
JAson
Call me stupid but I can picture a sierra steering setup in my head. What side steering arm off a merc do I need to fit 1 to a sierra.
JAson
Win if you can, Loose if you must, but never give up !!!!
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
just finished doing this last week you will need to rheem out about .5mm to make the bolt holes line up i already had a zlink which was cut to the new length sleeved and welded. $75 each is a bit steep as i picked mine up in Canberra for $40 for the pair
5" lift front locked looking for bigger tyres
ok guys i have been reserching this hard core.. i got priced $60 4 2 and that was sent to tasmanian form somwhere on the mainland
thats the thread with the most on it
http://www.outerlimits4x4.com/PHP_Modul ... +toy+diffs
and if anyone has a set of these (im going complete hi-steer)
feel free to inform me
Phil
thats the thread with the most on it
http://www.outerlimits4x4.com/PHP_Modul ... +toy+diffs
and if anyone has a set of these (im going complete hi-steer)
feel free to inform me
Phil
lay80n wrote:To run merc arms for X-over steer, you need the LHS arm.
Layto....
I bought some merc arms today. I'm going to only do the single sided crossover, but I bought both cos they were only $40 all up, including a tie rod end, and I might go hi-steer later.
I haven't actually installed them yet, but after having a quick look, I'm sure you need the right one not the left if you're only doing crossover steering.
Ben
Who is online
Users browsing this forum: No registered users and 0 guests