Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Home Made Hinged Shackles
Home Made Hinged Shackles
has any body made their own .I had extended shackles but got hung up on them alot
Don't do it, they are more trouble than they are worth.
That goes for reverse shackle (done it myself) and "hinged" shackles. (seen plenty)
That goes for reverse shackle (done it myself) and "hinged" shackles. (seen plenty)
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Gwagensteve wrote:Don't do it, they are more trouble than they are worth.
That goes for reverse shackle (done it myself) and "hinged" shackles. (seen plenty)
you saying don't do a SR??? despite the benefits of approach angle, movement direction of tyre when climbing, etc?
___,,,,_('o')_,,,,____
part of the newy conspiracy...
part of the newy conspiracy...
for both of those reasons. My sierra tracked really well at speed when SR and had less bumpsteer etc, but its climbing abilities reduced, because the car tries to drive over the top of the axle as the tyre moves back as it compresses. Tyre clearance becomes more marginal. The approach angle is not as good as you think because unless you end up with wacky caster, the front fixed mount position must be lower the the stock shackle location as the rear end of the spring lowers as you have to fit a shackle between the chassis and a spring.
The end result for me (I was SPUA) was no real improvement in approach angle and a reduction in clearance behind the axle due to the shackle.
I did it to do 3/4 eliptic in the front with 7.50 16's (go easy, this was in 1997 I figured I was hardcore:D) and the whole setup wasn't worth the effort.
It might work if you were spoa, but I really think that for off road work, stock shackle location rocks.
The end result for me (I was SPUA) was no real improvement in approach angle and a reduction in clearance behind the axle due to the shackle.
I did it to do 3/4 eliptic in the front with 7.50 16's (go easy, this was in 1997 I figured I was hardcore:D) and the whole setup wasn't worth the effort.
It might work if you were spoa, but I really think that for off road work, stock shackle location rocks.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
i made my own... they give 1/2" lift and open up to 160 degrees... can download the file to take to a laser/plasma cutter from www.suzukiinfo.com
do a search - i posted pics of it on here before in another topic of the same name?
do a search - i posted pics of it on here before in another topic of the same name?
The worst thing about censorship is ███████.
Who is online
Users browsing this forum: No registered users and 3 guests