Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front towhook attachment to an ARB bumper on a 110

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 134
Joined: Fri Mar 04, 2005 8:18 pm
Location: NZ

Front towhook attachment to an ARB bumper on a 110

Post by sausage »

Anyone got any pics?? Anything you would change if you have done it or do differently??

Thanks
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

Mate of mine put a Toyota hook on top on his Disco , just outside the upright. I am assuming Disco and 110 are similar
BUT he didn't plate it and the top buckled because it is thin.
I think the best place is on top next to the upright , and the bumper mount, but plate underneath with say 1/4 inch plate, about 80mm square at least.
Reagdrs Philip A.
Top
Posts: 5
Joined: Sun Jun 06, 2004 7:43 pm
Location: Perth

Post by DFENDA »

I had 2 front towing eyes installed by ARB to my Defender with std L/R factory bar. They removed bar to fit and reinforced with 6 mm plate. Eyes mounted outboard of chasis rails but level with them. No problem with snatch recoveries or double line winching. Only drawback is have to use shackles to attach straps etc. :cool: :D
So many tracks, so little time and money
Top
Posts: 10
Joined: Wed Apr 27, 2005 6:12 am
Location: Melb

Post by hiline »

my bar is a TJM bar

i have 2 hooks either side of the uprights


Image


cheers hiline
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 4 guests