Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
URGENT water damage!!!
Moderators: toaddog, TWISTY, V8Patrol, Moderators
URGENT water damage!!!
Ok i REALLY need some help here.
I went for a wheel today in my 2000 gu patrol 3.0 turbo diesel. it is auto. I went through a pretty solid water/mud hole and half way through there were huge ruts under water and my wheels fell in and my chassis was sitting on the mud and i got real stuck real quick.
My mate couldnt snatch me out from behind and couldnt get past so had to go back and around to snatch from the front which took a while. After he snatched me out from the front i started my car fine etc etc.
But once i started driving i started experiencing problems.
The car was very sluggish. I put my foot flat and it felt as if i was something was holding it back. It was so bad that once i was on the highway i could hardly get to 100 kph. And it was sitting on about 3200 rpm. But when i took overdrive off the revs dropped slightly to 3000...?
Really confusing. something really wrong.
The whole way home the temp guage did not move. However briefly after getting out of the water hole i notice the little orange "engine" light came on. i stopped to try find out what it was, when i restarted the car it was gone and did not come back on.
Anything any one can tell me about water damage that could of occured. I am really really worried.
I went for a wheel today in my 2000 gu patrol 3.0 turbo diesel. it is auto. I went through a pretty solid water/mud hole and half way through there were huge ruts under water and my wheels fell in and my chassis was sitting on the mud and i got real stuck real quick.
My mate couldnt snatch me out from behind and couldnt get past so had to go back and around to snatch from the front which took a while. After he snatched me out from the front i started my car fine etc etc.
But once i started driving i started experiencing problems.
The car was very sluggish. I put my foot flat and it felt as if i was something was holding it back. It was so bad that once i was on the highway i could hardly get to 100 kph. And it was sitting on about 3200 rpm. But when i took overdrive off the revs dropped slightly to 3000...?
Really confusing. something really wrong.
The whole way home the temp guage did not move. However briefly after getting out of the water hole i notice the little orange "engine" light came on. i stopped to try find out what it was, when i restarted the car it was gone and did not come back on.
Anything any one can tell me about water damage that could of occured. I am really really worried.
All the gear, No idea...
*From the sounds of it you turned the motor off when you where in the water????
If you did water may have gone up the exhaust........And your car has a cat that the water/mud may have stuff blocking the exhaust to some extent and causing it to labour????
Depending on height of water you were stuck in???
*If it was over the axles you may well have water in them...
fix - drop the oil and put new oil in
*If it was higher than the side steps good chance it has made it's way into the gearbox.....
fix - drop the oil and put new oil in
I figured out pretty early on in my 4x4 learning that water = BAD and only drive through it if you really have to......If you can drive around it no matter what people say....don't get suckered into trying to drive through cause it almost always ends badly or causes undue repairs down the track...
If you did water may have gone up the exhaust........And your car has a cat that the water/mud may have stuff blocking the exhaust to some extent and causing it to labour????
Depending on height of water you were stuck in???
*If it was over the axles you may well have water in them...
fix - drop the oil and put new oil in
*If it was higher than the side steps good chance it has made it's way into the gearbox.....
fix - drop the oil and put new oil in
I figured out pretty early on in my 4x4 learning that water = BAD and only drive through it if you really have to......If you can drive around it no matter what people say....don't get suckered into trying to drive through cause it almost always ends badly or causes undue repairs down the track...
Do a complete oil change after something like this. Including gearbox and transfer. Sounds like you have water in the gearbox that has thinned out the oil hence the engine is working hard to get the same speed cause the torque converter isn't stalling at the same rev's as it used to. Stall speed is when the gearbox and engine are spinning at roughly the same speed.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
i dont know about cars but on bikes if u drown ur bike or something like that simular stuff happens. on a bike check ur oil and if it isnt black (it goes like a milky colour that means water in there) drain it straight away and put new oil in then start it and run for a minute or 2 and then change the oil again do this a few more times and then in most casses they survive. i dont know much about cars i was just givin a sugestion i would just check the oil to see if there is any water in the engine at all. if there isnt i dont know wat it could be, dunno if this can help at all. dont know if bikes are at all the same. ok good luck with it.
I'm fairly sure they are drive by wire accelerators, probably the computer near the right foot got wet....then acc wont werk properley.
hopefully it will all come good when propereley dried, if not, then get it dried out properley. Main ecu may be high enough to be still dry, with luck. Have seen this happen twice with 3.0 litre turbo deisels
christover
hopefully it will all come good when propereley dried, if not, then get it dried out properley. Main ecu may be high enough to be still dry, with luck. Have seen this happen twice with 3.0 litre turbo deisels
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Stab in the dark. Air flow regulator.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
if it is the air flow regulator what do i need to do?
It was up to the step on the rear and on the left hand side the bottoms of the doors were under. The axles were under front and rear and most likely the gearbox to.
The front was sorta sticking up a little, the bottom of the bumper bar was clear by about a foot.
So i change all my oil. How do i go about cleaning out exhaust?
I will change diff, transger and gear oil today.
And i "think" (didnt really check) that my fillerwas out of the water, as my driver side steps and doors were high and dry above water level.
It was up to the step on the rear and on the left hand side the bottoms of the doors were under. The axles were under front and rear and most likely the gearbox to.
The front was sorta sticking up a little, the bottom of the bumper bar was clear by about a foot.
So i change all my oil. How do i go about cleaning out exhaust?
I will change diff, transger and gear oil today.
And i "think" (didnt really check) that my fillerwas out of the water, as my driver side steps and doors were high and dry above water level.
All the gear, No idea...
toughnut wrote:Do a complete oil change after something like this. Including gearbox and transfer. Sounds like you have water in the gearbox that has thinned out the oil hence the engine is working hard to get the same speed cause the torque converter isn't stalling at the same rev's as it used to. Stall speed is when the gearbox and engine are spinning at roughly the same speed.
isnt a torque converter sealed?
Just take your battery terminals off, turn the ignition key right round to start for a couple of seconds, then off again, go have a coffee, then put the terminals back on.
Limp mode is designed to get the vehicle out of trouble and to the work shop. There will be nothing wrong with the computers, they are just running in safty mode due to an error that occoured, possibly a spike, or a minor short, or a sensor that gave a false reading while under water.
If that sensor is still buggered, it won't reset, but chances are it will have dried out and once reset everything will run fine.
Limp mode is designed to get the vehicle out of trouble and to the work shop. There will be nothing wrong with the computers, they are just running in safty mode due to an error that occoured, possibly a spike, or a minor short, or a sensor that gave a false reading while under water.
If that sensor is still buggered, it won't reset, but chances are it will have dried out and once reset everything will run fine.
Judging by everyone's advice you might as well get a new 4x4.
being a 28 - 30k 4WD, thats not exactly an option at the present time.
Thanks all for your help, it is really appreciated, im so worried about my car...
So does everyone think dieselboy's method is worth a try?
I will also check air filter etc etc.
All the gear, No idea...
DEEV8 wrote:Judging by everyone's advice you might as well get a new 4x4.
being a 28 - 30k 4WD, thats not exactly an option at the present time.
Thanks all for your help, it is really appreciated, im so worried about my car...
So does everyone think dieselboy's method is worth a try?
I will also check air filter etc etc.
Resetting the computer wont hurt, but why not just take to a nissan dealer adn ask them to FIND the issue not FIX it.
they will plug a computer into it, adn tell you whats wrong within 30 mins. You could spend mths lookin
ok, i will try that then.
but theres something something else i just noticed this morning when starting it. when it park, it seems to rev higher than usual, but as soon as i put it in reverse it dropped back to normal again. then when i put it back in park, the revs went back up.
if that helps at all.
but yeah, im going to take it in and find out what is really wrong with it. thanks for all your opinions on the matter.
but theres something something else i just noticed this morning when starting it. when it park, it seems to rev higher than usual, but as soon as i put it in reverse it dropped back to normal again. then when i put it back in park, the revs went back up.
if that helps at all.
but yeah, im going to take it in and find out what is really wrong with it. thanks for all your opinions on the matter.
All the gear, No idea...
ok, i will try that then.
but theres something something else i just noticed this morning when starting it. when it park, it seems to rev higher than usual, but as soon as i put it in reverse it dropped back to normal again. then when i put it back in park, the revs went back up.
if that helps at all.
but yeah, im going to take it in and find out what is really wrong with it. thanks for all your opinions on the matter.
but theres something something else i just noticed this morning when starting it. when it park, it seems to rev higher than usual, but as soon as i put it in reverse it dropped back to normal again. then when i put it back in park, the revs went back up.
if that helps at all.
but yeah, im going to take it in and find out what is really wrong with it. thanks for all your opinions on the matter.
All the gear, No idea...
ok, i will try that then.
but theres something something else i just noticed this morning when starting it. when it park, it seems to rev higher than usual, but as soon as i put it in reverse it dropped back to normal again. then when i put it back in park, the revs went back up.
if that helps at all.
but yeah, im going to take it in and find out what is really wrong with it. thanks for all your opinions on the matter.
but theres something something else i just noticed this morning when starting it. when it park, it seems to rev higher than usual, but as soon as i put it in reverse it dropped back to normal again. then when i put it back in park, the revs went back up.
if that helps at all.
but yeah, im going to take it in and find out what is really wrong with it. thanks for all your opinions on the matter.
All the gear, No idea...
Im here for the sausage!
Who is online
Users browsing this forum: No registered users and 1 guest