VIT SAS KITS

Post by **OVERKILL ENG** » Tue May 03, 2005 9:53 pm

We now have available SAS kit for the Vitara it is available in three kits.
All kits are based on using toyota axles.

KIT 1:
Three controll arms.
Third link crossmember
Panhard Rod.
All mounts and hardware.
$1400

KIT 2
Three controll arms
Third link crossmember
Panhard rod
Springs
Top and bottom spring mounts
All mounts and hardware
$1800

KIT 3
Three controll arms
Third link crossmember
Pan hard rod
Springs
All mounts and hardware.
Brake lines
Shocks
Shock Hoops
Flipped arm
Drag link
Tie rod
$2750.

Post by **antt** » Tue May 03, 2005 10:15 pm

awesome stuff sam, ya beat calmini to it

Post by **sierrajim** » Tue May 03, 2005 10:21 pm

calling CJ :lol:

Post by **christover1** » Wed May 04, 2005 1:00 am

now I could own a vit

Post by **ed oorklep** » Wed May 04, 2005 8:13 am

Saweeeeet,
Are you able to sent this kit overseas? How much welding is involved? There is a lot of interest in the USA for such a kit, I'm sure you'll sell over there

Good Job and well done :!:

Post by **OVERKILL ENG** » Wed May 04, 2005 10:49 am

ed oorklep wrote:Saweeeeet,
Are you able to sent this kit overseas? How much welding is involved? There is a lot of interest in the USA for such a kit, I'm sure you'll sell over there
Good Job and well done

We are able to send oversea's
Thankyou
SAM

Post by **v8vitara** » Wed May 04, 2005 3:09 pm

Hi Sam,

do you have a drive in - drive out option for people.

Also someone mention on of the forums about talking to you about fitting a 2.0L 4cyl vitara motor from a 1997-1999 into a 1.6L EFI place in a 1993 LWB vitara..

Seeya
Jimbo

Post by **OVERKILL ENG** » Wed May 04, 2005 6:51 pm

Labour to do kit three is $2000 plus diff.
SAM

Post by **rickybergantino** » Wed Jul 19, 2006 11:03 am

Is this kit only for the front diff or it also includes the hardware needed for the rear???

the stock Suzuki R&P gears are 5.13:1 and toyotas are 5.29 or 5.71:1

theres no match!!!!

can you please post a pic of each kit???

Post by **gecko270** » Wed Jul 19, 2006 11:12 am

make one for the jimny

Post by **grimbo** » Wed Jul 19, 2006 12:24 pm

gecko270 wrote:make one for the jimny

Jimny's are already SAS. You do know what SAS is don't you? Straight Axle Swap

Post by **"CANADA"** » Wed Jul 19, 2006 1:08 pm

grimbo wrote:
gecko270 wrote:make one for the jimny
Jimny's are already SAS. You do know what SAS is don't you? Straight Axle Swap

Its 'Solid Axle Susp'

Post by **christover1** » Wed Jul 19, 2006 1:13 pm

MADZUKI wrote:
grimbo wrote:
gecko270 wrote:make one for the jimny
Jimny's are already SAS. You do know what SAS is don't you? Straight Axle Swap

Its 'Solid Axle Susp'

I thought it was Sierras are Superior

Post by **gecko270** » Wed Jul 19, 2006 1:13 pm

Nup, didn't. Do now.

I was focusing on the components in the kits. Pan hards ect. Any sort of kit to get the best out of a jimny would be good. Swapping standard springs isn't enough I don't think. I personally would like to go to 4" lift, but the problem is control arms are way to expensive from what I can find, to compensate the axle being pulled rearward when it's lifted.

It appears to me that older coilies and leaf sierra's are easier to lift and fit 30's straight up. Especially the leafies. And besides, I'm envious of most of the zooks I've seen on here.

Cheers

Post by **Huggy** » Wed Jul 19, 2006 5:54 pm

will this kit fit the 98 on gv?

Post by **redzook** » Wed Jul 19, 2006 6:10 pm

Huggy wrote:will this kit fit the 98 on gv?

if not he will be able to make one to suit

Post by A1 » Wed Jul 19, 2006 9:11 pm

Hell ive been thinkn that IF I was to SAS another Vit that it would be a GV these 1's just look shweeet

Outer Limits 4x4 Board

VIT SAS KITS

VIT SAS KITS

drive in drive out option.

Who is online