33's on challenger?

[Lordtrunks]

anyone running 33's on your challenger 2" up enough any rubbing going on? My NF fits them fine but i'm helping a guy build a 04 and he is freaking that they won't fit its got me kinda worried so i wanna make sure.

[pickle]

Actually tried the 32s I had for the Pajero on my Challenger and although i did not go for a drive their seemed to be a fair bit of room. Ended up selling them..

[Bitsamissin]

Hey Patrick, I'm sure a Challenger needs a 2" body lift or 2-2.5" suspension lift to run 33x12.5" tyres. The wheel wells are smaller than a Pajero even though at first glance they look the same.
Me thinks 32x11.5" standard and the b/l or s/l for 33x12.5".

[Lordtrunks]

Thanks frank i got some lift coils coming.

[dave74]

hello pickle

you could watch the works that y have done on my montero sport ( pajero sport in France), sorry but it is writte in french.

http://www.le-pajero.com/forum/viewtopic.php?t=1515
http://www.le-pajero.com/forum/viewtopic.php?t=1479
http://www.le-pajero.com/forum/viewtopic.php?t=606
http://www.le-pajero.com/forum/viewtopic.php?t=1283
http://www.le-pajero.com/forum/viewtopic.php?t=1516

For the body lift look at "montage d'un body lift"
http://www.le-pajero.com/meca_ent/meca_ent.htm

[Lordtrunks]

well got the 33's on 33x13.50 STS's had to trim a bit of fender but thats it I used pajero 2.5 lift coils and got about 3" on the challenger and cranked the bars up pretty close they need to be reindexed if more is wanted. Now this truck had a custom bumper on it so these would rub on a factory bumper. I'll get some pics posted