Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff Heat

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Diff Heat

Post by Mudzuki »

Just wondering how hot your diff housings get?

Went for a run a while ago, afther about half an hour of driving on road, i found the diff housing to be almost untouchable!!! I am running 5.12 vit gears in WT housing.

Opinions?

Cheers
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

do you have enough of the correct type of oil in the diff?

Lockers, welded etc?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

mine always gets very hot, especially now with the lower ratios. probably cos the pinion spins that much faster for the same road speed.
of course it could be bearing wear etc.
90/140 gear oil helps.
ya can also get heat transfer from crook uni, so werth checkin that, too.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

Thanks, will get Joe to have a look when i have time.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests