Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lost
Moderator: Micka
lost
i have a 88 rangie with a 3.5 ltr that is fuel injected to cut a long story short it is using a lot of fuel. Computer has been replaced, fuel pressure has been tested, mixtures have been reset, new spark plugs,mass air flow meter tested,fuel injecters looked at and cleaned,no vacum leaks have been found.When car is stationary and is on a diagnostic computer it shows that everything is fine. Has anyone got any idea where to go next
that would indicate that you are running rich - too much fuel. So maybe Air flow meter is up the creek or something
Basically it means that not all the fuel that is being pumped into the cylinder is being burnt and what isnt being burnt is coming out the exhaust.
Mine is doing this at the mo and is in the mechanics on mine you can smell the fuel - very rich.
Basically it means that not all the fuel that is being pumped into the cylinder is being burnt and what isnt being burnt is coming out the exhaust.
Mine is doing this at the mo and is in the mechanics on mine you can smell the fuel - very rich.
Who is online
Users browsing this forum: No registered users and 0 guests