i have a 1986 sierra with a 1.3l motor. the engine will not idle (i curently have the idle set at 2000rpm) just so i can drive it. if sprayed carby cleaner in it and held a rag over it when it is reving and it still wont idle smoothly lower than about 1500 to 1700 rpm. i have noticed that wen i hold the choke almost closed (about 2mm gap) i can adgust it to idle smoothly at around 800-900rpm but as so as i let it open it will run rough and eventualy stop. is there a way to adjust the auto choke easily or a part which can be replaced??
thanks........dayne
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
auto choke probs.
auto choke may be blocked up.. most work with radiator water going thru them, and sometimes the crap builds up. If so, just take hoses off carb, run some water thru the auto choke with a garden hose, or blow out with air...... other cause can be low water in radiator, as choke is the highest point in the water system, it stuffs up first.
christover
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Who is online
Users browsing this forum: Bing [Bot] and 2 guests