Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
more front travel
more front travel
I have a 89 sierra with 2"King Springs and Hilux shocks. I have put in 1" extended shackles and have removed a leaf from the front spring packs. I have been told to get more travel out of my extisting setup I need to open up the spring clamps. Is this safe? Do I have any other options that wont break the bank?
Chris may have a photo of my rear spring from AT04 that bent on VIC range. If it was not for the spring clamp the spring would have left the car undrivable.
Basically the spring bent up to the clamp, the rest was fine.
Travel is not everything, stability and reliability is.
Have you looked at RUF? or even running rubber bushes instead or urethane?
Basically the spring bent up to the clamp, the rest was fine.
Travel is not everything, stability and reliability is.
Have you looked at RUF? or even running rubber bushes instead or urethane?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
sierrajim wrote:Chris may have a photo of my rear spring from AT04 that bent on VIC range.
nope, sorry, not got one, maybe Mock has.
But I agree, loosen them, but don't remove them.
Mine are lossened quite a bit, had no probs, yet.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Also, undo top shock mount, jack up side of car till spring is fully drooped, then check if shocker is long enuff, or mounted in best place.
On mine, I gained a heap more droop, by lowering the top shock mount by 12 - 15mm. I just put a spacer under the shock mount.
Now spring opens up fully. Zook ain't heavy enough to compress my shock all the up.
christover
On mine, I gained a heap more droop, by lowering the top shock mount by 12 - 15mm. I just put a spacer under the shock mount.
Now spring opens up fully. Zook ain't heavy enough to compress my shock all the up.
christover
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
more front travel
I am running rubber bushes, will look at the prospect of putting a spacer in the front shock mounts. Thanks guys
jabtronic wrote:What's the easiest way to open the clamps?
I just hammered a screwdriver to lift them enuff to get the pliers on and just bent em up a little.....just loose, imho, so they still do whatever they designed to do, but are less restrictive.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Who is online
Users browsing this forum: No registered users and 0 guests