This is my latest saga....
When i put my foot on the break, the dash and radio lights fade....
Then at cruizer i was just told that my break lights are constantly on.
Also when the car is turned off and i put my foot on the break, the parkers come on and the dash lights etc.
ummm..... where do i start to look?
its a jeep... and no, i dont always understand.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
electrical problems.... grr...
Moderator: -Scott-
what year is the jeep?
prob look at why the brake lights are always on first once this is sorted you will prob find that other things will be sorted
first of all is it your brake lights or is it your rear lights that are on?
if it is your brake lights work backwards from the brake lights
make sure the rear lights are being grounded well enough then go to the brake switch which located on the brake pedal make sure that is switching as it should you may find that the switch is rooted but yeah just make sure there is power on the right side of the switch etc
well you get the drift
prob look at why the brake lights are always on first once this is sorted you will prob find that other things will be sorted
first of all is it your brake lights or is it your rear lights that are on?
if it is your brake lights work backwards from the brake lights
make sure the rear lights are being grounded well enough then go to the brake switch which located on the brake pedal make sure that is switching as it should you may find that the switch is rooted but yeah just make sure there is power on the right side of the switch etc
well you get the drift
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
My guess: somehow, the normal earth for your dash and parkers has failed, so they're earthing through the brake light filaments and causing them to appear on. When you apply brakes the other lights can't earth properly, so they fade. Remove your brake light bulbs and see if you can get the rest of your lights to work.
Cheers,
Scott
Cheers,
Scott
accesories
hi were any new accesories fitted before the problems started (uhf , cd) definatly sound like some sort of earth problem.
see ya mav
Who is online
Users browsing this forum: No registered users and 5 guests