I have two front diffs, one on the truck and one 'donated' spare.
The spare is a drum front end so I think (correct me please someone if i'm wrong) this means it has the coarse spline axles ??
If so are the housing the same, the plan is to strip the donor diff and cut and rotate the knuckles without having to take the truck off the road for any length of time.
At the moment the pinion is pretty much horizontal and the tail shaft pops out at full flex.
Any help would be great
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40 Series Diff Question
Moderators: toaddog, Elmo, DUDELUX
40 Series Diff Question
[url]http://www.my4x4.com.au[/url]
Re: 40 Series Diff Question
greenfourby wrote:I have two front diffs, one on the truck and one 'donated' spare.
The spare is a drum front end so I think (correct me please someone if i'm wrong) this means it has the coarse spline axles ??
If so are the housing the same, the plan is to strip the donor diff and cut and rotate the knuckles without having to take the truck off the road for any length of time.
At the moment the pinion is pretty much horizontal and the tail shaft pops out at full flex.
Any help would be great
Cheers
think it depends what year
as i had a 1977 drum with fine spline
77 FJ40
www.advanced4x4.co.nz
www.advanced4x4.co.nz
Re: 40 Series Diff Question
It's probably fine spline unless it's pre '75ish. The housings changed the size of the cv's and the diffs end balls in about '79 by about 5mm. Otherwise the same.
Like turbo4t says, the spline change took place in September '75. But for a diff that is out of the truck, it might be hard to tell the year. The easiest way is to take the locking hub out and see for yourself.
I thought you Aussies don't call these vehicles "trucks" like we Yanks do? I thought to you "trucks" are heavy duty vehicles like those road trains? Or is it a case of the internet language influencing the local lingo?
Dave
I thought you Aussies don't call these vehicles "trucks" like we Yanks do? I thought to you "trucks" are heavy duty vehicles like those road trains? Or is it a case of the internet language influencing the local lingo?
Dave
beanz2 wrote:Like turbo4t says, the spline change took place in September '75. But for a diff that is out of the truck, it might be hard to tell the year. The easiest way is to take the locking hub out and see for yourself.
I thought you Aussies don't call these vehicles "trucks" like we Yanks do? I thought to you "trucks" are heavy duty vehicles like those road trains? Or is it a case of the internet language influencing the local lingo?
Dave
I should of thought about taking the hub off !!
My missus and Kids always refer to anything 'larger than a car' as a truck, but sometimes it's more like 'get that bloody truck of my driveway'
Thanks I will let you know
Rob
[url]http://www.my4x4.com.au[/url]
Who is online
Users browsing this forum: No registered users and 3 guests