Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Chev dizzy upgrade

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Chev dizzy upgrade

Post by Kev80 »

I have the old twin point dizzy on my Chev 350 & was thinking about replacing it with a newer electronic type but i dont know much about whats available & where to get them.

Just after a basic (cheap) one without all the extra race ignition etc.

What do you guys use & were to buy from ?
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Posts: 379
Joined: Sat Aug 21, 2004 2:40 pm
Location: Epping , Vic

Post by BASSYK »

repco sell mallory(SP?) setups , they guoted me around $350 for a HEI dizzy for my 308
Gu TD42t

[url]http://www.3rdrock4x4.com[/url]
Posts: 127
Joined: Wed Oct 29, 2003 8:41 pm
Location: wellington NZ

Post by eddie »

i done a HEI on mine

just conect ya power and rev counter
rip out ya old coil and off ya go
as to where to get them over there i could not tell ya
77 FJ40
www.advanced4x4.co.nz
Posts: 52
Joined: Sun Apr 25, 2004 7:01 pm
Location: tamworth nsw

Post by nischev »

I have procomp dissy in mine and no problems with it. Different ones for different applications including one with coil built into the cap.
http://www.procompelectronics.com

Available from sydney speed supplies not sure where else.
madness
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

Might go & have a look at a HEI.

Did you notice any difference in revs/ power after installing one, is it worth it ?
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

ive got a vn 5 litre dissy on mine, (at least thats what the cap and rotor are from) just runs the sensor to an ICE ignition module. I didn't put it there so i don't know if its a straight swap though.
There are no stupid questions, but there are a LOT of inquisitive idiots
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Give Sam ring at "Enginemart"
Deals only in Chev stuff and is well priced.

0403 741 708

or

03 8790 3402

email.....
enginemart@hotmail.com

And are they worth upgrading ???????
HELL YEAH !
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

I will look them up, thanks.
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Posts: 367
Joined: Fri Jan 21, 2005 10:45 am
Location: Tasmania

Post by Tas_Dean »

Contact Petroject for a price. I think they qouted about $250 for an electronic ignition setup for my old 253.

Cheers, Dean
Just a web wheeler now!
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

just bought one for the boat. s/h with all new moving parts and cap $180 for a delco hei. you need new leads as they are different budget $100 for these. superformance in south brizvagas

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

I recently read on another forum where someone asked what the $250 Procomp HEI ones are like and not one positive response. I'd get a better brand HEI though.
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Ring your local yank car wrecker, should be able to pickup a chev hei for $50 or so.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Post Reply

Who is online

Users browsing this forum: No registered users and 162 guests