Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tray bob including the side boards

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

tray bob including the side boards

Post by roberts »

has anyone cut down there tray and side boards i know i would be straight forward with a flat tray
Top
Posts: 477
Joined: Tue Sep 16, 2003 4:51 pm
Location: Canberra

Post by Slayer »

sounds like it would turn out a bit funny, could be costy and time consuming to get the sides to all line up again. build a new one nice and short, and keep your current one for when u wanna cart stuff..

or maybe u could get a tray off a dualcab thats already got the sides build for it and stuff.
For sale: extended shackles - custom made, PM for details
$POA
WANTED: hilux crawler transfer gears
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

If your going to run IFS rears and extended shackles either bob the tray after you do this or allow for the shackles sticking out when you shorten it. I bobbed mine as short as possible and now the shackles stick out so i need to modify it now. :oops:
Yurich Design Services
www.yds.net.au
Top
Posts: 325
Joined: Sat Aug 07, 2004 7:19 pm
Location: Newcastle

Post by Sandy Rut »

Do it - its too easy.
You dont need to spend $ on anything besides cutting wheels for your grinder.
Cutting down your tray is good cheap fun.
Top
Posts: 48
Joined: Tue Dec 21, 2004 12:55 am
Location: inside

Post by darkor »

got a d/cab hilux that i cut 600mm out of the middle of the tray that way i could keep the rear of the tray looking std with light mounts etc.

cut same amount out of side boards and welded back together. wasn't hard to get it all to line up and find i rarely have side boards on anyway.
84 d/cab hilux ...... a work in progress.
just not much progress at the moment !?!
Top
Posts: 48
Joined: Tue Dec 21, 2004 12:55 am
Location: inside

Post by darkor »

found a pic of my tray. took a day to do.
You do not have the required permissions to view the files attached to this post.
84 d/cab hilux ...... a work in progress.
just not much progress at the moment !?!
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: tray bob including the side boards

Post by bogged »

I think Tonka did with his.
check the members section
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Re: tray bob including the side boards

Post by ToNkA »

bogged wrote:I think Tonka did with his.
check the members section


Mines a style side. ;)
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

Sandy Rut wrote:Do it - its too easy.
You dont need to spend $ on anything besides cutting wheels for your grinder.
Cutting down your tray is good cheap fun.


can i super glue it back togerther

or do i need a welder if so what type its a steel tray
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

darkor wrote:found a pic of my tray. took a day to do.


would you be able to post a pic of it with the sides on
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

roberts wrote:
can i super glue it back togerther



:shock:
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

ToNkA wrote:
roberts wrote:
can i super glue it back togerther



:shock:


i would use the heaver duty stuff :D
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

roberts wrote:
ToNkA wrote:
roberts wrote:
can i super glue it back togerther



:shock:


i would use the heaver duty stuff :D

:rofl: Theres these things called "welders", have you heard of them?
Yurich Design Services
www.yds.net.au
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Perkins paste :idea:
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 48
Joined: Tue Dec 21, 2004 12:55 am
Location: inside

Post by darkor »

roberts wrote:
darkor wrote:found a pic of my tray. took a day to do.


would you be able to post a pic of it with the sides on



will try to take one and have it up before monday
84 d/cab hilux ...... a work in progress.
just not much progress at the moment !?!
Top
Posts: 3556
Joined: Mon Dec 13, 2004 7:58 am
Location: Western Sydney

Post by Busiboy »

roberts wrote:
ToNkA wrote:
roberts wrote:
can i super glue it back togerther



:shock:


i would use the heaver duty stuff :D


No need, Clag will hold it together for about .005 seconds, use the welder mate ;)
:armsup:
Something witty said by someone famous
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Busiboy wrote:
roberts wrote:
ToNkA wrote:
roberts wrote:
can i super glue it back togerther



:shock:


i would use the heaver duty stuff :D


No need, Clag will hold it together for about .005 seconds, use the welder mate ;)
:armsup:


why both wasting all your $$$ welding when you can use sum good 100mph tape :?:
Top
Posts: 3556
Joined: Mon Dec 13, 2004 7:58 am
Location: Western Sydney

Post by Busiboy »

AnthonyP wrote:why both wasting all your $$$ welding when you can use sum good 100mph tape :?:


actually, I have to mod my suspension mounts and hate welding, sounds like a great idea :armsup: heaps easier.

Anyone for a test drive?
Something witty said by someone famous
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

Busiboy wrote:
AnthonyP wrote:why both wasting all your $$$ welding when you can use sum good 100mph tape :?:


actually, I have to mod my suspension mounts and hate welding, sounds like a great idea :armsup: heaps easier.

Anyone for a test drive?


Doesnt sound qw bad as having to drive with a broken tie rod end thats been tie wired together :roll: At least if the tape breaks you can still steer :D


The tie wire did break a few times....so we just added more and more :lol:
You do not have the required permissions to view the files attached to this post.
----HillBilly Engineering----
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

roberts wrote:
ToNkA wrote:
roberts wrote:
can i super glue it back togerther



:shock:


i would use the heaver duty stuff :D

fuckin amatures.. YOU USE SOLDER TO HOLD IT TOGETHER
Top
Posts: 48
Joined: Tue Dec 21, 2004 12:55 am
Location: inside

Post by darkor »

we just used the FORCE on mine :D
84 d/cab hilux ...... a work in progress.
just not much progress at the moment !?!
Top
Posts: 48
Joined: Tue Dec 21, 2004 12:55 am
Location: inside

Post by darkor »

pics with side boards on
You do not have the required permissions to view the files attached to this post.
84 d/cab hilux ...... a work in progress.
just not much progress at the moment !?!
Top
Posts: 436
Joined: Sun Jun 13, 2004 3:02 pm
Location: Building true offroad trailers and campers

Post by dieseldude »

That looks cool!

I rate it hey..........
Droughtmaster Offroad Trailers and Campers

Offroad Camper MkI - Build up:
http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=106712
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

looks sweet that want im after

ill get a round to it one day thanks
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

Image
Image
Image
Image
Image


Thats about all the pics I have available of my shortened tray. Its 1240mm long and 1600mm wide.
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests