Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cheap air tank anyone?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Cheap air tank anyone?

Post by bogged »

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 07636&rd=1
$30 so far

BRAND NEW STEEL 25 LTR AIR TANK

540mm LONG x 240 mm WIDE

1 X 1/2" OUTLET, 1 X 3/8" MALE OUTLET FOR REGULATOR

1 X BRASS WATER DRAIN ON THE BOTTOM

TANK HAS A WORKING PRESSURE OF 800 KPA

THESE TANKS ARE EASILY MOUNTED USING 3 mm x 25 mm

MILD STEEL FLAT WITH ALL THREAD WELDED TO EASH END

THE BAND RAPS AROUND THE TANK WITH A RUBBER INSULATOR

AND 2 X 25 mm ANGLE DROPPERS OFF THE CHASSIS

TANK JUST NEEDS A GOOD COAT OF PAINT
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Doesn't look very 'brand new'
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

blkmav wrote:Doesn't look very 'brand new'

I thought the same , but the price is right.
Posts: 109
Joined: Thu Aug 26, 2004 9:45 pm
Location: SE Melbourne, Australia

Post by rlaxton »

Not very good value at the moment.... $46 as I write. I got a similar tank from SuperCheap from $20 from a busted compressor. Hack the wheels of it and the job is done.

Richard.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

rlaxton wrote:Not very good value at the moment.... $46 as I write. I got a similar tank from SuperCheap from $20 from a busted compressor. Hack the wheels of it and the job is done.

Richard.


I got mine free when I bought all the fittings, same deal, off farked compressor from gasweld
If the above post did not offend you in any way please PM me so I can try harder!!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests