Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Recommended 11mm on 10k winch 10k warn he said to go with 35mtrs (to fill drum)or upto 45mtrs (before it starts binding) on winch. 40mtrs happy medium. price $15.50 a mtr.
so for 40mtrs $620
ARB dude said either a 'the flat battery terminal type mount' to bolt on, or to use a slip knot on the drum. then you can spin the cable round and use other end if need be, also wont pull off if you get to end of cable by mistake.
I would go with the loop both ends. The one i bought at TTC was done this way and it is good to be able to turn the cable over and also not have to worry about pulling it too far out.
Recommended 11mm on 10k winch 10k warn he said to go with 35mtrs (to fill drum)or upto 45mtrs (before it starts binding) on winch. 40mtrs happy medium. price $15.50 a mtr.
so for 40mtrs $620
ARB dude said either a 'the flat battery terminal type mount' to bolt on, or to use a slip knot on the drum. then you can spin the cable round and use other end if need be, also wont pull off if you get to end of cable by mistake.
I would go with the loop both ends. The one i bought at TTC was done this way and it is good to be able to turn the cable over and also not have to worry about pulling it too far out.
on the other hand it is so easy to splice, but I do agree, the battery terminal doeas SFA
If the above post did not offend you in any way please PM me so I can try harder!!
