Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NF heating up

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

NF heating up

Post by corkhead »

Ok .... my newish engine V6 auto NF 89 is heating up on idle only.

I just changed the clutch fan and seems to be working fine. What i noticed last night (after coming back from Gembrook) is that the water seems to expand into the recovery tank and not go back into the engine ? The radiator is low yet the recovery tank nearly full. When i pulled up last night i could here a slight buzzing/hissing sound from the radiator cap.

Would you guys agree to grab a new rad cap ? anything else you suggest to check ....went over the whole engine and couldnt see any leeks ...... the hose cant be blocked as water is going into the tank but not out ?

weird one .....
www.victoriancampertrailers.com.au
www.salon13.com.au
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Sounds like the radiator cap is doing what it's supposed to (releasing to allow excess pressure to escape) however they are cheap so it can't hurt to replace it.
I would also check your thermostat it could be sticking not allowing proper water flow.
If your not actually loosing coolant due to a leak (only from overheating) then check out your radiator it may need a recore.
Also make sure the water pump is spinning ok, not siezed, belt is tight enough etc.
When are we gonna see this beast ?? Daryus Paj is just like yours, Gen 1 lwb V6, front Lokka, 33" Mongrels = goes very well (just needs gears).
I just luv my "clacker Jabber"
Posts: 408
Joined: Thu Sep 25, 2003 1:21 pm
Location: "Shit"ney

Post by Noisey »

Radiator Cap!!
When I read about the evils of drinking, I gave up reading
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

ok .... missus is grabbing a radiator cap this morning for me ..... and yes i wanna see this unique paj of yours frank !

i cant play this weekend ...stock car racing in moama .....

so maybe next weekend .... went out to gembrook last night (wed) and didnt a couple of hills/cliffs i couldnt get up before .... crawled up them no worries :)

hopefully just the cap - cheers guys
www.victoriancampertrailers.com.au
www.salon13.com.au
Posts: 408
Joined: Thu Sep 25, 2003 1:21 pm
Location: "Shit"ney

Post by Noisey »

Put up a post when you are going out next - would also like to see your car.
When I read about the evils of drinking, I gave up reading
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

just having lunch ..... took a pic yesterday ... have changed the rad cap and see how it goes .....

heres the old beast !
You do not have the required permissions to view the files attached to this post.
www.victoriancampertrailers.com.au
www.salon13.com.au
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

actually a mate and i are looking at doing another couple of hours tonight !! rain for the first time in ages ..might make andersons a lil more exiciting.

might head out around 7pm .... live in pakky ...not far to gembrook :)
www.victoriancampertrailers.com.au
www.salon13.com.au
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

doing the trifecta here .....three posts in a row !

changed the radiator cap - no difference. Only starts to heat up once the water level drops in the radiator.

noticed on the new cap though - MUD ! built up the rubber washer where it seals ....

now how could mud get into the cooling system ??? also the green is turning brown .....
www.victoriancampertrailers.com.au
www.salon13.com.au
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Mud? or grease? Oil in the coolant will normally work its way to the top of the radiator and collect as a thick brown gooey mess.

Normally not good thing...
:cry:
Scott
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Hmmm either needs a coolant flush and possibly a radiator recore or I'm afraid to say it maybe a head gasket :cry:
I just luv my "clacker Jabber"
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

ive seen head gaskets go b4 ... normally with radiator cap off ...coolant at top of radiator bubbles away ..froths ..........

also milky oil on dipstick ...neither of these two are happening .........

im going to give it a good flushing this arvo .......leaving early from work to get right for weekend (meant to be going to moama)
www.victoriancampertrailers.com.au
www.salon13.com.au
Posts: 199
Joined: Wed Sep 01, 2004 10:39 am

Post by PajeroSRV »

Looks like the car is coming up a treat.

Nice.
Posts: 73
Joined: Mon Jul 14, 2003 7:05 pm
Location: Concord

Post by sascot »

when u take more phots. be sure to add the engine bay as i'm curious how / where u put the dual batts. What did u move? :?:
POOJAR NF V6 33" MT's 2" bod lift & usual addons for the shopping trolley.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

corkhead wrote:ive seen head gaskets go b4 ... normally with radiator cap off ...coolant at top of radiator bubbles away ..froths ..........

also milky oil on dipstick ...neither of these two are happening .........


No. Stuff will go from high pressure to low pressure.

Bubbles come from high pressure exhaust gas leaking into the coolant.
Milky oil comes from coolant leaking into areas which drain into the sump.
Oil in the coolant comes from a crack between a high pressure oil gallery and cooling system.

You could have a faulty head gasket, or a crack somewhere else. Headgasket is a lesser problem. :cry:

Good luck,

Scott
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest