Having sold my series3 swb landrover to buy a family car for the wife, I have now purchased a swb sierra hardtop with a rusty roof and a few dings but it came with a good softop body so I am happy! The guy who owned it bought it with a reco 1.3 which he promptly destroyed by supercharging it(ran far to much psi!) I owned a stockman ute years ago wich had a corolla motor in it , What I want to know is, is this an easy conversion ? what is needed ? is there a cheap alternative that will bolt straight in? All info will be much appreciated as I need to get back out in the dirt as cheap and as quick as possible!
Thank you!
P.S. Guess I better change my name now that I have seen the light!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cheap options!
Cheap options!
If it aint broke, dont fix it !!
Re: Cheap options!
LandyLad wrote:Having sold my series3 swb landrover to buy a family car for the wife, I have now purchased a swb sierra hardtop with a rusty roof and a few dings but it came with a good softop body so I am happy! The guy who owned it bought it with a reco 1.3 which he promptly destroyed by supercharging it(ran far to much psi!) I owned a stockman ute years ago wich had a corolla motor in it , What I want to know is, is this an easy conversion ? what is needed ? is there a cheap alternative that will bolt straight in? All info will be much appreciated as I need to get back out in the dirt as cheap and as quick as possible!
Thank you!
P.S. Guess I better change my name now that I have seen the light!
If your on the cheap , I reckon wack an add in the wanted column on this site for a 1.3 lots of people pull them out in search of power ,
if your not doing open highway work the 1.3 is fine in my books .
you might pick one up for a couple of hundred , GOOD luck LD !
K series Corolla motors are not a very easy swap into a 1.3. I believe it was quite an easy swap into a 1.0 litre or LJ80 but the 1.3's are substantially different in configuration.
Also, it will be impossible to get a K series corolla motor legal in a 1.3 engined Zook as they are either too old if they were an australian delievered K, or an import with unknown emissions if it is a similar age to the car.
In any case, the 5k would be the only motor that is a better motor than the 1.3. they are quite torquey, but there are a heap of fitment issues.
Also, it seems pretty dumb to take out an alloy OHC 1.3 and fit a cast iron pushrod 1.2-1.5.
I would stick with the 1.3. As you alreadu have all accessories, It is quite cheap to get a FWD 1.3 from a swift and swap all of the accessories over. Christover has done this from this board.
Also, it will be impossible to get a K series corolla motor legal in a 1.3 engined Zook as they are either too old if they were an australian delievered K, or an import with unknown emissions if it is a similar age to the car.
In any case, the 5k would be the only motor that is a better motor than the 1.3. they are quite torquey, but there are a heap of fitment issues.
Also, it seems pretty dumb to take out an alloy OHC 1.3 and fit a cast iron pushrod 1.2-1.5.
I would stick with the 1.3. As you alreadu have all accessories, It is quite cheap to get a FWD 1.3 from a swift and swap all of the accessories over. Christover has done this from this board.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Bits for sale!
Thanks for your replies! A bloke in my street is moving up north in a couple of weeks, he tipped his lwb over last weekend and wants to get rid of it before he leaves! he wants $1500 it has a good motor ,g'box etc.. if anyone is interested!! I will be getting a 1.3 off of him that he has in his shed so that solves my engine problems!! Will let you know of any other problems as they arrive!
If it aint broke, dont fix it !!
Who is online
Users browsing this forum: No registered users and 0 guests