Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Drill and tap

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Drill and tap

Post by Cheezy4x4 »

I need a drill and tap size chart, eg: what size drill is needed for thread tap size, also would like the die sizes too. :D
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

http://www.rightcoastcrawler.com/billaV ... sIndex.htm

Go to Drilling And Tapping 8) Doesn't have Dies though...
Top
Posts: 349
Joined: Tue Nov 12, 2002 5:40 pm
Location: Central Coast NSW

Post by hophoar »

Die sizes are equivelent to the thread size, ie: 10x1. 10mm diameter x 1mm pitch, metric is easy when you get into BSP and Whitworth things become harder.
Top
Posts: 119
Joined: Wed Oct 23, 2002 7:54 pm
Location: Brisbane, Australia

Contact:
Contact tjpete

Cheezey Needs a decent reamer chart ...

Post by tjpete »

Mark,

You can obtain one for free from any decent supplier of fasteners. The folks in this URL are the ones who supply me:

http://www.boltking.com.au/
Peter Kincade
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Just go to a Blackwoods or other hardware store and ask for a zeus book it has every thing you need in a small flip top book only a couple of dollars all machineists have them
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest