Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rocky springs

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Rocky springs

Post by elgordomuygrande »

What do you fellas think about resetting rocky springs to a eye to eye distance the same as an f20 an then putting them on. I guess the springs are way too stiff so removing a leave would be nessesary. Also, the springs are wider so I'll havo to make new springhangers and shackles. I should get some height out of it an can make the shackles the same lenght as stock so getting driveline angles stock again. How do the rocky springs take resetting? Will they sag in a flash after it's been done?


Ideas on this, from experience or common sense, are very well appreciated :lol:


Ron
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Posts: 576
Joined: Wed Jun 02, 2004 8:17 pm
Location: Adelaide, South Aus

Post by Dangerous Dave »

Brand new springs will last a lot longer than reset springs, it comes down to how much you want to spend. I'd spend the extra dough and do it properly the first time rather than having to take the reset springs back out in 12 months and installing new ones then.

My 2c
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Post by elgordomuygrande »

Yeah, I also prefer brand new ones. But it seems no aftermarketsprings with lift are available. other option is let a springshop make a custom set. just have to find a good one. Reason I wanna get rid of the extended shackles is drive line vibes and the quirky steering. Thankls for advise

Cheers, Ron
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

get your tape measure out and see if springs off another vehicle will fit :D

how long eye to eye and how wide is a rocky spring :?: Spring rates can be tailored by adding/ removing :cool:

Maybe a lux front spring or something would fit... they're 45" long and 70mm or so wide ;)
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Post by elgordomuygrande »

TA for advise, found out about springshop yesterday not rhat far away. So custom it will be :armsup: and it seems it isn't that expensive over there, suits a tight arse like myself :oops:
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest