G'DAY I ' M AFTER SOME INFO ON WHAT CAN BE DONE ABOUT A LOOSE
HARMONIC BALANCER. THE NUT THAT HOLDS IT ON SEEMS TO BE TIGHT,
SO THEIR MUST BE WEAR ON THE PULLEY OR THE KEY WAY . HAS
ANYONE HAD ANY EXPERINCE WITH THIS OR KNOW HOW IT CAN BE
FIXED ETC. MY COUSIN IS LOOKING AT BUYING THIS 60 SERIES THUS
THE NEED FOR ANY INFO .THANKS
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 SERIES 2H LOOSE HARMONIC BALANCER
Moderators: toaddog, Elmo, DUDELUX
60 SERIES 2H LOOSE HARMONIC BALANCER
94 HILUX 2.8 T/D F/R AIR LOCKERS 2" SUS LIFT WINCH UHF 32 BFG MUDS ETC
80 series t/d 33muds 3" lift winch
80 series t/d 33muds 3" lift winch
This can be a bit ugly if left for a long time , you will stuff the keyway slot in the nose of the crank which is tricky to repair .
I would be taking the harmonic balancer off and seeing whats causing it to be loose .
Hopefully a shit harmonic balancer and that can be easily replaced with a new key way , i reckon dont leave it longer cause it will get worse maybe you've caught it in time before its rooted the crank , but i would definetly be taking it of and checking it out .
I would be taking the harmonic balancer off and seeing whats causing it to be loose .
Hopefully a shit harmonic balancer and that can be easily replaced with a new key way , i reckon dont leave it longer cause it will get worse maybe you've caught it in time before its rooted the crank , but i would definetly be taking it of and checking it out .
is the whole balancer loose or has just the rubber gone bad and only the outer ring is loose?
as has been suggested, pull the balancer off and inspect the crank before making any decisions. if the crank is stuffed it'd probably be cheaper to find another motor.
as has been suggested, pull the balancer off and inspect the crank before making any decisions. if the crank is stuffed it'd probably be cheaper to find another motor.
Free air locker to the first 20 callers!
I heard this problem was present mostly in earlier model cruisers, as toyota began putting locktite on the harmonic balancer nut after about 86.
I was told by a mechanic quite a few years ago i should check to see if the nut was loose or gone! on the harmonic balancer as its a comon problem with the 2H, especially if someone has had it off as they more than likely didnt locktite it back on.
How do you tell if your harmonic balancer is loose? Movement in the belts?
I was told by a mechanic quite a few years ago i should check to see if the nut was loose or gone! on the harmonic balancer as its a comon problem with the 2H, especially if someone has had it off as they more than likely didnt locktite it back on.
How do you tell if your harmonic balancer is loose? Movement in the belts?
Who is online
Users browsing this forum: No registered users and 0 guests