30" tyres with Calmini 3" Lift??

Website · Post by **suzukiboy** » Tue May 03, 2005 8:09 am

Will 30 x 9.5 Wrangler MTR fit under a 95 Vitara with no mods to the front wheel well - firewall area??
3" Calmini Suspension Lift to go in.
Do I need wheel spacers at all??

Post by **Andrew81** » Tue May 10, 2005 2:12 am

I havn't tried it myself but from what i've seen and what i've read on here you shouldn't have any problems if you have 3 inch lift.

Post by **rgzook** » Tue May 10, 2005 6:42 pm

My sister owned a vit once with a 3 inch lift and it ran 31's it looked sweet

Post by **RB zook** » Tue May 10, 2005 6:43 pm

you should be able to fit them no problems at all

even with no lift you should be rite if you hammer the seams flat

Post by **Tyson** » Wed May 18, 2005 5:30 pm

After reading this post, I'm seriously considering purchasing a 3" Lift, and go for the 30" or 31".

What's the least I have to do, to fit big tyres in ? Im worried about rubbing of the wheel arches.

Post by **geckos** » Wed May 18, 2005 8:58 pm

There is the calmini official site, www.calmini.com or go to www.kaos4x4.com.au. These blokes are in canberra and are the ONLY authorised dealer for calmini products in Australia. They're number is on the web site and speak to hamish, really helpful. But since you already have the lift you might know this........

Post by **mtzook** » Thu May 19, 2005 3:59 am

How much did you pay for that 3" calmini lift. It's $1000USD over here. I hear the shocks are utter crap that come with it, so most people switch them out, or get $50 off the kit price to not get the shocks with it. Shows you how much they're worth.

Anyway, that kaos link didn't work without passwords and crap. Bit of a joke...

Post by cj » Thu May 19, 2005 9:27 am

geckos wrote: These blokes are in canberra and are the ONLY authorised dealer for calmini products in Australia. ....

Are they the ONLY authorised dealer in the same way as the guy in Perth is the ONLY authorised dealer?

Website · Post by **suzukiboy** » Thu May 19, 2005 1:57 pm

I bit the bullet and brought a set of 30" 9.5 MTR.
Have half a lift in at the moment rear end, other half this Friday.
But by what I have been told 30" is no problem.
Will see friday if they touch anywhere.

Try this for Kaos

http://www.kaos4x4.com.au/

mtzook I can PM what price I payed as I did a group buy?
Running the Calmini shocks see how they go.

cj there are a few different suppliers on the East Coast wheather they are authorised dealer no idea.

Kaos is the cheaper price.

Post by **mtzook** » Thu May 19, 2005 2:33 pm

Yeah, PM me. I'm also wanting to find out regular RRP for it there.

Post by GV » Thu May 19, 2005 7:49 pm

geckos wrote:There is the calmini official site, www.calmini.com or go to www.kaos4x4.com.au. These blokes are in canberra and are the ONLY authorised dealer for calmini products in Australia. They're number is on the web site and speak to hamish, really helpful. But since you already have the lift you might know this........

Incorrect ...

There are TWO authorised Calmini dealers in Australia. Below is an extract from some e-mail correpondence I had with Calmini ...

Sir

Please contact our two Australian dealers here:

http://www.4wdusa.com.au/3.html
http://kaos4x4.com.au/

Please let us know if you have any other questions. Thank you for your interest in the CALMINI product line. Awaiting your reply.

Best Regards
Sales Department
CALMINI Products Mfg.
www.CALMINI.com
Sales: 800-345-3305

Outer Limits 4x4 Board

30" tyres with Calmini 3" Lift??

30" tyres with Calmini 3" Lift??

30" tyres on vitara, with 3" lift

Re: 30" tyres on vitara, with 3" lift

Re: 30" tyres on vitara, with 3" lift

Who is online