Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Error code 42

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Error code 42

Post by Westoztroopa »

Hi folks.

The poor old Jacks been out of action for a coupla weeks with an electrical problem. Engine cranks but does not fire. Error code 42 is displayed which is to do with the electronic spark timing circuit. Has my local mechanic stumped and is about to get towed to Holden to get looked at. Anyone had this code come up for them before and if so what was the eventual cause/fix?

For those who dont know the vehicle is a '92 3.2L V6.

Any help appreciated.

Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

All fixed, turned out to be a faulty immobiliser. :roll:
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Top
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

thats one thing you would not think of straight away

good work its fixed and you are mobile again :cool:
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Top
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Post by Utemad »

I removed a mates faulty immobiliser once. Although it was easy to diagnose as it was in an XY Falcon ute. It was the only electronic device there was to fail :lol:
Land Rover Discovery series 1 V8
Top
Posts: 507
Joined: Tue Nov 26, 2002 6:32 pm
Location: Nannup, Western Australia

Post by Westoztroopa »

The immobiliser was suggested in the early stages but as the engine was actually turning over it was thought that it probably wasnt the immobiliser as it normally cuts out everything when it is functioning. Obviously its a multi-system cutoff immobiliser and only one of the systems was faulty...
Unfortunately the mechanic had already tried replacing ignition modules and crank sensor so a fair bit of wasted time and money. :roll:
I'm sure that an auto sparky would have picked it up in no time but I'm just glad to have the old Jack back in action. :armsup:

Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
Top
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Post by Utemad »

That is the problem with aftermarket immobilisers. If the mechanic did not install it then he would have had no idea what and where the immobiliser cut. Topped off by the computer giving an error code that was probably right but the problem was not what the manual would have said for that code.

Put it down to experience. At least you have it back on the road now.
Land Rover Discovery series 1 V8
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 1 guest