Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bullbar Lift

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 14
Joined: Wed Jan 19, 2005 9:20 pm
Location: Victoria

Bullbar Lift

Post by Rod_4x4 »

Hey, ive done numerous searches on this site but I can hardly find any info on raising a bullbar with a pto winch on it after a body lift. I probly couldnt do it myself so im wondering who could do it, Im from Traralgon, I can travel to melb, but the closer to me the better really. thanks in advance for any help.
-Rod :)
Top
Posts: 14
Joined: Wed Jan 19, 2005 9:20 pm
Location: Victoria

Post by Rod_4x4 »

Thats Traralgon in VIC,
Cheers :roll:
Top
Posts: 716
Joined: Tue Jan 13, 2004 7:24 pm
Location: Melbourne

Post by TUFFRANGIE »

Ring Sandy@Aus4wd or Cheezy if his phone is working yet. They will be able to put you on the straight and narrow if no one here can
Top
Posts: 8
Joined: Thu Feb 17, 2005 1:35 pm
Location: Rye, Vic

Raised bull bar

Post by dazz mav »

Try giving Greg Smith a call from Smities Outback on 03 5995 4325. He's in Cranbourne and does a great job (and he's a good bloke)
93 diesel mav. Basic truck at the moment but plans are brewing.... 4" spring, OME shocks, adj panhard, castor bushes, usual other. Wanting 9000lb winch, cargo barrier.
Top
Posts: 716
Joined: Tue Jan 13, 2004 7:24 pm
Location: Melbourne

Re: Raised bull bar

Post by TUFFRANGIE »

dazz mav wrote:Try giving Greg Smith a call from Smities Outback on 03 5995 4325. He's in Cranbourne and does a great job (and he's a good bloke)


Bundyrum4x4 from this board if i remember correctly
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Post by bundyrum4x4 »

As said, I can do it no probs.

We have laser cut plates which we use for ARB bars or can custom make whatever is required.

Greg
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest