Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Slimming down... Putting the ute on a diet.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 12
Joined: Mon May 16, 2005 11:45 am

Slimming down... Putting the ute on a diet.

Post by mini696 »

I recently bought a ute with a trayback and I want to slim the tray down to the width of the cab (about a foot overall).

Has anyone done this before?

I was going to cut a strip from the centre and join the two halves back together. The other option is to remove the tray sides, cut the floor, and reattach the sides (of course I still have to cut and weld the rear 'door'.

Ideas anyone??

Mick
"MaJiK"
Top
Posts: 470
Joined: Wed Aug 04, 2004 11:15 am
Location: Teesdale

Post by Camshaft1 »

Go the second option i reckon
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Second option sounds better to me, but I guess it depends a little bit on how the whole thing is constructed.

Jason
This is not legal advice.
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

second option means not having to redo the mounts to the chassis
Top
Posts: 312
Joined: Sat Feb 08, 2003 12:49 pm
Location: Esperance WA, currently travelling around OZ

Post by GQ Toy »

Did the second option on mine (ally tray), sides for mounting dropsides were riveted on took them off and used a half worn cutoff disc in a circular saw to cutt floor on each side, then re welded the sides on. Trimmed rear drop side in the same way. Main hoop running above the cab took a piece out of the middle. Dead simple - except my ally welding was crap :oops: and had to get that done properly.
Whole job took about 3 nights.
[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests