Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

g.u.rear coils stuffed

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 240
Joined: Sat Mar 20, 2004 6:38 pm
Location: far east gippsland

g.u.rear coils stuffed

Post by johno »

overloaded my gu tray and left it sitting for a few weeks during recent house shift, rear coils sagged badly and wont take any weight, can anyone recomend a good set of coils, have'nt priced originals dont think there is any point as these were'nt up for much
johno
Posts: 314
Joined: Sun Oct 17, 2004 7:46 pm
Location: Melbourne

Post by AndrewPatrol »

you'll find heaps of opinions about springs, like tyres. My word of advice is that if you change from standard and your cars still under warrantee be careful, Nissan wont wanna know about the rear spring towers breaking, known prob. Get em strengthened, if you wanna play hard.
Posts: 899
Joined: Mon Mar 28, 2005 7:52 pm
Location: BrisVegas

Post by gu4800 »

I have found Kings very good, and reasonably priced.

There is a guy on here (4WDSTUFF) who seems to sell them at a reasonable price, and is located in Brisbane (Logan I think).

Send him a PM for a price.
____________________
Dan

[quote="v840"]I bet you're the kind of person, when you're railing someone in the ass
you don't even have the common courtesy to give them a reach around! [/quote]
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

There are only 3 places that manufacture coil springs in OZ. These are kings, lovells and dobinsons. All are good springs although my dobinsons have not saged as much as my kings did.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

dobinson HD's 3 years old and only sagged 20mm and that was on a GU to the cape and back..

then i bought that set and put it on my GQ with a 30mm spacer in front to compensate for my steel bar and winch...

and still went well ;)

TOM
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

I might get them to sag a bit more if I can get through more than 4 days of competition... :oops: :roll: :D
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

toughnut wrote:There are only 3 places that manufacture coil springs in OZ. These are kings, lovells and dobinsons. All are good springs although my dobinsons have not saged as much as my kings did.


BS.

There are many more - these are just the popular ones.
Dobinson seem quite good from what I've seen.

Dave.
Land Rover Discovery - GQ conversion underway
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

DaveS3 wrote:
toughnut wrote:There are only 3 places that manufacture coil springs in OZ. These are kings, lovells and dobinsons. All are good springs although my dobinsons have not saged as much as my kings did.


BS.

There are many more - these are just the popular ones.
Dobinson seem quite good from what I've seen.

Dave.

Like who???? wizard? snake?etc they all use kings and sell them as their own brand...I spose you could be talking about fulcrum(lovells) or pedders (lovells) or old man emu (king)...
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

toughnut wrote:
DaveS3 wrote:
toughnut wrote:There are only 3 places that manufacture coil springs in OZ. These are kings, lovells and dobinsons. All are good springs although my dobinsons have not saged as much as my kings did.


BS.

There are many more - these are just the popular ones.
Dobinson seem quite good from what I've seen.

Dave.

Like who???? wizard? snake?etc they all use kings and sell them as their own brand...


Browns Springs - Make all theirs for Rangie Spares
Will custom make aswell.
Land Rover Discovery - GQ conversion underway
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Goddamb obscure rangie people.... :roll: :D
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

toughnut wrote:Goddamb obscure rangie people.... :roll: :D


;)
Land Rover Discovery - GQ conversion underway
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Toughnut is mainly correct, there are 3 major coil spring makers and heaps of companies rebadging these 3 as their own, and there are a few others that manufacture their own but I don't know who they are. It would make and interesting post.

Springs are $150 a pair (normally Lovells but can do kings and Dobinsons) delivered to your door. If you are looking for Extra heavy duty the the rears are $160 for the pair delivered.
Dobinsons Shocks $95 each delivered
Oztech shocks $105 each delivered (limited time)(Lifetime warranty)
Procomp shocks $125 deivered

I would love to help in any way I can
Shane
Last edited by Suspension Stuff on Thu May 26, 2005 6:58 pm, edited 2 times in total.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

4WD Stuff wrote:Dobinsons Shocks $95 each delivered

Shane


So are these re bagded as something else more expensive aswell?
Got anymore info on these?

Dave.
Land Rover Discovery - GQ conversion underway
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

I was in Dobinsons today in Rockhampton where they make all their springs. The shocks are made in a factory in Europe but are made under the Dobinson name. I don't have any more info than that. You can call Jim in the sales department on 07 4927 7444. It would be nice if you mentioned my name as well :roll: . :D
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Not that I am aware of. For the shocks anyway. I thought they were made in South Africa
Lovells shocks are identical to EFS except for badge. I can get you these to for $95 each delivered.

To answer your below post go to dobinsonsprings.com and click stuff until you get to shockies.
Last edited by Suspension Stuff on Wed May 25, 2005 11:11 pm, edited 1 time in total.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

So what type / style of shock are these?

Dave.
Land Rover Discovery - GQ conversion underway
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

toughnut wrote:
DaveS3 wrote:
toughnut wrote:There are only 3 places that manufacture coil springs in OZ. These are kings, lovells and dobinsons. All are good springs although my dobinsons have not saged as much as my kings did.


BS.

There are many more - these are just the popular ones.
Dobinson seem quite good from what I've seen.

Dave.

Like who???? wizard? snake?etc they all use kings and sell them as their own brand...I spose you could be talking about fulcrum(lovells) or pedders (lovells) or old man emu (king)...


Pedders have their own coil plant in Melbourne.
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

told

Post by mav »

toughnut wrote:I was in Dobinsons today in Rockhampton where they make all their springs. The shocks are made in a factory in Europe but are made under the Dobinson name. I don't have any more info than that. You can call Jim in the sales department on 07 4927 7444. It would be nice if you mentioned my name as well :roll: . :D


i was told that dobinsons shocks were restickered old man emu
see ya mav
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Dobinsons shocks are made in a little country in northern Africa next to Egypt. It starts with a T. :lol:
I have read that Old man Emu were rebadged monroe shocks, but it could just be a rumour.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Post by morkz »

4WD Stuff wrote:I have read that Old man Emu were rebadged monroe shocks, but it could just be a rumour.


aint no rumour however people will correct you by saying that they are made by monroe to arb specifications
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

Dobinsons are NOT restickered OME's (springs or shocks!)

OME shocks are made by Monroe to OME specifications and are not the same as monroe's.
The hardest thing about owning a jeep is telling your parents you're g a y!!
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

dobinsons

Post by mav »

dobinsons spring are made at their factory but i was told by someone at dobinson that their shocks were restickered ome but i know that ome are made by monroe to ome specs.
see ya mav
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Dobinsons shocks are imported from Europe (from Jim the sales managers mouth). They are not rebadged anything. However they are made in a factory where other leading European brand shocks are made.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Ok Ok rebadged is a little harsh. I withdraw my previous statement but I will add another.

Tunisia is where Dobinsons shocks are made and that is where Luke Skywalker use to live when he was a kid. He used Dobinsons shocks on his little racer. Tunisia is in between Algeria and Libya on the north of Africa. I think these people are french. Could be another rumour though. I'd bet they are European engineered and owned.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

If it`s a French company who makes them it could well be Arvin Meritor.
Alex
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I don't know whether they are French or not but I did a Google search and found at least 1 shock manufacturer in Tunisia. This companies name is Selekta International. I don't know if this is the company that makes them or not. I found another search result with a different phone number. It was called Sia. But looking at the initials it could be the same company.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest