Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wall thickness of control arms

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5
Joined: Sun Apr 10, 2005 6:37 pm
Location: northside brisbane

Wall thickness of control arms

Post by henry33 »

Hi, 1st post, what would be the wall thickness of rear lower control arm on a '91' GQ SWB (it's not solid is it). Was thinking of cutting in half and inserting solid bar in centre to lengthen 16mm (2" lift), welding and then covering in angle and more welding.
Or does anybody know where to buy longer(cheezy) in brisbane,tried to ring cheezy.

Thanks in advance
Craig
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

the arms I've seen done, have been cut in half and have been sleeved over the outside of the original arms with thicker steel, and welded to the bush ends.
BTW, Cheezy has closed his doors to the public, you will have to go to a reseller for him.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 522
Joined: Tue Aug 31, 2004 2:35 am
Location: Sydney

Post by mabsydney »

I've just fitted snake racking adjustable lower trailing arms.....check them out on their website www.snakeracing.com.au ...........not cheap, but you will be doing well to bend them.

Cheers,

Martin
1989 Nissan Safari TD42 with stuff
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Pop into my shop some time for a beer and chat and I can show you the 3RDS lower arms that I stock and sell.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Re: Wall thickness of control arms

Post by marin »

henry33 wrote:Hi, 1st post, what would be the wall thickness of rear lower control arm on a '91' GQ SWB (it's not solid is it). SNIP


Wall thickness on the stock 1's is absolutely pathetic, something like 2 mm wall seamed tubed.

marin
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Top
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

ludacris wrote:Pop into my shop some time for a beer and chat and I can show you the 3RDS lower arms that I stock and sell.

LudaCris
pop in for a beer hey i might just do that :D
you can show me the lower arms if you want :roll:
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Top
Posts: 14
Joined: Fri Nov 05, 2004 5:48 pm
Location: Brisbane

Post by xw383 »

I can vouch that the standard arms are crap and the weakest point on a great truck. I broke two lowers, one upper and the front of the pinion clean off all in one go just by slipping offa rock .I have now fitted 3rds lower arms and haven't looked back.
GU Patrol, EFS Suspension ,Switzer Turbo,Rock Sliders(ouch ).
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest