Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

High Beams on 80 Series not working

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

High Beams on 80 Series not working

Post by g35me »

My high Beams are not working. They used to be intermitent then they went through a stage when I could pull back on the stalk and they would turn on but when pushing forwards on the stalk to put them on permanently they all the headlights would turn off. Now they just dont come on at all.

I read on here that if you clean the little metal tag and ball bearing thing on the bottom of the stalk it may work again. Unfortunately this did not happen.

Does anyone know of another solution?
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

could the little module with the push switch for the highbeams be nackered? Besides the indicator wires, should some of the wires from the module have power when the high beam switch is on?
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 33
Joined: Fri Apr 22, 2005 7:26 pm
Location: brisbane

Post by mechtech »

this does sound like your stalk is not making contact, normally when swiching to hi-beam it will cut power to low beam, but you will still have power to your park lights, if you want to try and fix old unit rather than new or wreckers. pull the shrouds off and see if you can see the contacts in action, may need to pull stalk unit out,, and check its operation and if the h/b contacts are touching, or if you make them touch with gentel pressure that the h/b come on. if it does come on, maybe try increasing the down pressure of the contact, with slight manipulation ;) good luck....
whatsup...
The man they couldn't r@#t, shoot or electrocute......
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

U havent got bigger than std globes in it have u???

If so it may have burnt the dipper switch out.
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Get the multimeter out.....u should get 12v at the globes all the time and switched earth....if you dont have power, its a fuse...unlikely though....if you dont have earth on highbeams, its a buggered stalk.....or maybe headlight relay.....
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

No I dont have larger globes in it but I was looking under the dash today and saw a melted wire its red with a green stripe.

It will be some kind of feed to the highbeams, it activates when the high beams are switched so I assume that it is not a stalk issue it is somewhere further down the line.

Unfortunately the wire escapes into the loom and heads out of the firewall so I cant track it down.

I am wondering where the fuse for the highbeam is so I can check that?
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest