Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine Compression

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 42
Joined: Wed Aug 04, 2004 12:31 pm
Location: Melbourne

Engine Compression

Post by troyster »

I have searched and there are few different figures that come up for the normal pressure when a compression test is done. They vary from 140 -170.

I am getting the donk's compression (1.3L 1990 Sierra) checked out on Friday and would like to know what is considered good and bad compression. Any advice would be appreciated.
90 Zook (My toy)
02 KJ Cherokee (Her transport)
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

From memory i think new it was 200psi, and acceptable was anything above 175psi with less than 10psi variance between cylinders. Will look in my FSM and edit this if im wrong :D
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 443
Joined: Tue Oct 12, 2004 10:45 am
Location: Sailsbury-Brisbania

Post by JrZook »

Im pretty sure ur right ive seen the 199psi figure somewhere
Top
Posts: 580
Joined: Tue Jan 20, 2004 7:49 pm
Location: port stephens

Contact:
Contact toysuzi

psi

Post by toysuzi »

hey all

(kpa) kilopascals - to - (psi) pounds-force per square inch
1 kpa = 0.145 psi

100kpa == 14.5 psi
1100kpa = 145 psi
1175kpa = 170 psi
1200kpa = 174 psi
1300kpa = 189 psi
1400kpa = 203 psi

engine compression specs
note these spec,s are with efi fuse removed
as wet bore will affect readings

f10a
1175-1300kpa
with maximum variation or 100kpa

G13A
1100-1400 kpa
max-v 100kpa

G16B efi
1100-1400kpa (carby G16a 1200-1400kpa)
max-v 100kpa

jimny g13bb
1200-1400
max-v 100kpa

j20a
1100-1400
max-v 100kpa

and so on

cheers
daryl
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest