Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clutch

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 75
Joined: Thu May 12, 2005 12:43 pm
Location: cairns

clutch

Post by muf-247 »

what is a good brand of clutch for a 91 zook and how hard to install
Posts: 165
Joined: Tue Oct 12, 2004 8:33 pm
Location: clontarf, qld

Post by inka »

exedy or is it daikin or daiko :?
not hard as a zook box weighs nothing...
as long as you get the plate straight ;)
rockstock gq patrol
Posts: 526
Joined: Tue Aug 24, 2004 2:22 am
Location: Sydney

Post by Podge »

Providing it is a 1.3, and you are after a simple replacement clutch you can't go past Exedy (was Daikin) P/No. R330N. Exedy also have a heavy duty kit available which is approximately 25% up on clamp load over the standard unit, P/No. R330NHD. Part numbers shown are the old part numbers but they would get the right product. Don't use Korean made clutches ie. PBR (Valeo) etc. as you'll always get what you pay for. As for really good, I've found Centreforce to make the best heavy duty clutch for a Sierra. However, these aren't distributed in Australia anymore and would be really difficult to get.
http://stores.shop.ebay.com.au/4wd-products
Posts: 62
Joined: Wed Feb 16, 2005 10:42 am
Location: USA new jersey

Post by wildchild1066 »

if you want the centerforce these guys ship anywhere http://www.puresuzuki.com/terms_&_conditions.htm
GOING THE DISTANCE
[img]http://i7.photobucket.com/albums/y300/wildchild1066/DSC00759SmallCustom.jpg[/img]
Post Reply

Who is online

Users browsing this forum: No registered users and 77 guests