any hints on how to remove my rear axles from a 1lt diff?
we tried reversing the drum and using it as a makeshift slide hammer to no avail.
what next? i dont have a slide hammer btw..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
removing rear axles
removing rear axles
ht zook with bog, rust and mt's
this is my wheelbase |<-------->|
this is my wheelbase |<-------->|
cheers zook60. the diff wasnt in the car tho so i ended up belting a piece of wood wedged in between the drum and the backing plate. same technique, same result.
my main concern was that we were missing something in the teardown which was preventing us from pulling the axles (like a circlip or similar), but it seems they were just stuck fast. all good now. everyone go back to your pr0n.
my main concern was that we were missing something in the teardown which was preventing us from pulling the axles (like a circlip or similar), but it seems they were just stuck fast. all good now. everyone go back to your pr0n.
ht zook with bog, rust and mt's
this is my wheelbase |<-------->|
this is my wheelbase |<-------->|
ok the real story is this:
we tied a snatch to one end via the shedpost, then attached a triple hitched rope to the other end via the zook and put a bit of tension on it.
THEN we got the flog-o-meter onto it and it popped right out. it was perfectly safe so go back to your pr0n.
we tied a snatch to one end via the shedpost, then attached a triple hitched rope to the other end via the zook and put a bit of tension on it.
THEN we got the flog-o-meter onto it and it popped right out. it was perfectly safe so go back to your pr0n.
ht zook with bog, rust and mt's
this is my wheelbase |<-------->|
this is my wheelbase |<-------->|
Who is online
Users browsing this forum: No registered users and 1 guest