Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

308 into 40 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 10
Joined: Sat Apr 30, 2005 7:53 pm
Location: Melbourne, Victoria

308 into 40 series

Post by DJ_Brown »

Hey fellas, how are we all??
im just wondering how hard it is to swap in a holden red motor into the 40 series... more than likely a 308. What is needed to do the conversion?? am i going to need adaptor plates and stuff like that???
Thanks fellas
David
.:_DJ Brown Project_:.
Top
Posts: 109
Joined: Sun May 22, 2005 1:56 am
Contact:
Contact alchemist

Post by alchemist »

Marks 4WD Adaptors can sell you adaptor plate and engine mounts and some other bits and pieces to do the job.. haven't done the conversion myself but there isn't too much messing around from what I've seen/heard.
06 Hilux SR5 D4D
- www.newhilux.net
Top
Posts: 10
Joined: Sat Apr 30, 2005 7:53 pm
Location: Melbourne, Victoria

Post by DJ_Brown »

awesome, thanks mate, i appreciate the reply.. where in Vic would i get a kit?? do i order it from a local 4WD workshop? or can i get them over the net or something??
thanks again
.:_DJ Brown Project_:.
Top
Posts: 50
Joined: Wed Apr 20, 2005 9:24 pm

Post by simo toyo »

marks 4wd adaptors is in melbourne dude. shouldn't be to hard to find them.
fj 40, 82 model factory ps..... oohh yeh, 350 chev. lots more to do. getting there, getting there....
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

where in vic, at marks adaptors

do a search on previous posts on this and related subjects

also do a check for the prob solving for the overheating side of life before you run into the probwich many have had

and for my 2cents worth if youre plannin on ofroading with the vechile you would be better going a injected motor to prevent carby issue's unless youre plannin on going on gas
Top
Posts: 96
Joined: Thu May 05, 2005 6:02 pm
Location: Parramatta

Post by more power »

http://www.marks4wd.com/
my fj40 needs more flex
350 chev with t400 soa 3'body lift..rs9000 warn 9000bl winch
Top
Posts: 10
Joined: Sat Apr 30, 2005 7:53 pm
Location: Melbourne, Victoria

Post by DJ_Brown »

Awesome, thanks alot fellas.. ill let you know when ive got the VR calais 5L injected V8 in her :D

Thanks again
David
.:_DJ Brown Project_:.
Top
Posts: 10
Joined: Sat Apr 30, 2005 7:53 pm
Location: Melbourne, Victoria

Post by DJ_Brown »

Awesome, thanks alot fellas.. ill let you know when ive got the VR calais 5L injected V8 in her :D

Thanks again
David
.:_DJ Brown Project_:.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests