Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

V8 engine into Land Cruiser

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 103
Joined: Tue Aug 17, 2004 5:26 pm
Location: Slovenija (EU)

Contact:
Contact buger

V8 engine into Land Cruiser

Post by buger »

A friend have a Land Cruiser BJ 40 with unimog axles, and is planing to replace the curent engine (3.5 turbo) with a Grand Cheroke 5.2 V8.
He has a BJ 71 tranny and would like to know if exsist some adapter for this combination?
Top
Posts: 240
Joined: Sun Jul 06, 2003 10:22 pm
Location: perth west australia

Post by roscoFJ73 »

I dont know much about the Cherokee motor, but there is an overwhelming amount of adapters and info regarding the 350 chev swap.
So much easier to follow a trail that others have blazed before you and get a better result. :)
1988 FJ 73 LX Lim Ed powered by 1HZ
1995 HZJ75 cab chassis
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

There is a Jeep 5 speed gearbox called the AX15 that is almost identical to the R151 gearbox used in the Bundy. If a Bundy output shaft is fitted, it may well suit the BJ71 transfer.

The question is whether there are clutch housings to mate the AX15 to the 5.2L engine. The AX15 is normally found behind their 4.0L six petrol motors. I'd suggest asking in the Jeep forum.

Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests