Forgive my ignorance, its the first time i been playing with these motors
Any one had any trouble with any particular brand of fan belts for the TB42 or am i better off biting the bullet and buying nissan stuff?
Oil filters? again any i should avoid or any i should try and seek out?
Coolant? how prone are the water galleries to being chewed out by cheap coolant or is nissan the only way to go again?
Thanks for any help
Simon
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Servicing questions - best parts?
I stick with genuine belts and coolant, filters I am more flexible, saying that I usually use genuine as well.
Not all genuine prices are sky high, I got genuine belts and water pump cheaper than aftermarket.
Common Nissan parts are usually reasonable, go for a less common part then hold on while you bend over ($500 for a GU diesel air box only + $500 for the pipes to connect to the turbo
) - went to the wreckers and modified instead (got own parts - cost $0)
Not all genuine prices are sky high, I got genuine belts and water pump cheaper than aftermarket.
Common Nissan parts are usually reasonable, go for a less common part then hold on while you bend over ($500 for a GU diesel air box only + $500 for the pipes to connect to the turbo
) - went to the wreckers and modified instead (got own parts - cost $0)
Coolent all u need is corrosion inhibitor in the system...
fitlers, oil i only use RYCO as with fuel....
air filter doesnt really matter on brand unless u want to go up a notch to a K+N one of anything....
fan belts, no dramas at all with brand thus far. I use DAYCO belts, never a problem......
screwy
fitlers, oil i only use RYCO as with fuel....
air filter doesnt really matter on brand unless u want to go up a notch to a K+N one of anything....
fan belts, no dramas at all with brand thus far. I use DAYCO belts, never a problem......
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Who is online
Users browsing this forum: No registered users and 36 guests