Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Good quality steel wheels

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Good quality steel wheels

Post by Utemad »

Hi Guys,

I'm not buying any but I just wanted to know what brands make a good quality steel wheel.

I was shown two ROH Track II 15x7 rims on a balancing machine today and both of them had variation between the edges of the rim. As in the distance between the areas where the bead sits varied.
Not good when you're trying to get a good balance.

The tyre guys reckon that the rims are cheap and that is what they would expect from these rims.
Land Rover Discovery series 1 V8
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Eastern wheel works.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 928
Joined: Tue Apr 06, 2004 5:42 pm
Location: newy

Post by customhilux »

the best steel rim is the cheapest. :lol:
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=47136]THE SUSLUX[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=50913]THE EXTRACAB[/url]
Top
Posts: 314
Joined: Sun Oct 17, 2004 7:46 pm
Location: Melbourne

Post by AndrewPatrol »

Yeh i've had tyres blow off sunnies real easy under low pressures but not on other wheels (yet)
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

rims

Post by klrevo »

what 'other' wheels??? ;)
Top
Posts: 928
Joined: Tue Apr 06, 2004 5:42 pm
Location: newy

Re: rims

Post by customhilux »

klrevo wrote:what 'other' wheels??? ;)
cartwheels :?
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=47136]THE SUSLUX[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=50913]THE EXTRACAB[/url]
Top
Posts: 314
Joined: Sun Oct 17, 2004 7:46 pm
Location: Melbourne

Post by AndrewPatrol »

genuine nissan, alloy or steel. maybe somethuing to do with previous utemad comments.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

I had some CSA Ranger RV steel rims and they were impossible to balance due to sideways runout at the rim edge. The replacement set they supplied was just as bad. :roll:

Ended up getting my money refunded and bought alloys instead..... No more balance problems and improved ride.
David
Top
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Post by Utemad »

AndrewPatrol wrote:maybe somethuing to do with previous utemad comments.
If you're referring to the wheel bearings thread then yes this is all related.
Land Rover Discovery series 1 V8
Top
Posts: 510
Joined: Fri Mar 26, 2004 7:58 pm
Location: vic

Contact:
Contact mudtoy

Post by mudtoy »

Dynamic 4x4 have just brought in a new line of steel wheels...less expensive than procomp!
www.4wdtv.com.au
SPOA FJ40, 400hp stroker, ARB locked x2, Silverstones, Superwinch, Narva lights, EFS springs, 1284 RTI...
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests