Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I got myself a gizmo to remind myself to turn off my headlights - i can be a bit forgetfull
Thing is, the instructions say to connect red wire to headlamp fuse/line, and the black to something else in the fuse box that is only on when the ignition is.
You do that in a Sierra, and buzz away it goes. :(
How would you wire up a little buzzer like this in a zook with negative switching?
i had a similar issue with the remote for my car. it's boot switch release was negative triggered but the motor was positive operated.
what i did was wire in a relay to turn the negative signal into a positive.
basically you wire the relay as normal, but instead of earthing it to ground, use the negaitive trigger.
whenever the negative trigger is on, the relay is open.
there are probably other ways of doin it, this is fairly cheap, a bit of muckin round with wiring, but not too bad.
