Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Slider steps?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 26
Joined: Mon May 24, 2004 5:48 pm
Location: Brisbane

Contact:
Contact trex_Aus

Slider steps?

Post by trex_Aus »

Any suggestions as to where I can get some slider rails for my LWB GQ waggon. A plan or suggestions on how to DIY would also be nice. My lil bro is OK with a MIG
GQ 4.2 Diesel, 2" lift, Duel Batteries, Waeco fridge freezer, Snorkel, 33" BFG muddies, GME TX4400 CB, drawers, Garmin GPS72. Plus Grand Cherokee for partner and Aussie Swag CT
Top
Posts: 109
Joined: Mon Jan 17, 2005 4:21 pm
Location: Forest Lake

Post by shortie »

see tech discussion. a thread in there now on sliders.
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

i am building mine out of tube at the moment.. if you can wait till monday i will get some pics up of mine fitted to my lwb gq for ya....


david.....
www.bolsys.com.au

the original and the best
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Heres a link to mine that i built

http://www.outerlimits4x4.com/PHP_Modul ... cs+sliders


And heres another set a made for a doods 80 series cruiser


http://www.outerlimits4x4.com/PHP_Modul ... es+sliders


Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

couple of pics of silver gqs i did for him this weekend....
You do not have the required permissions to view the files attached to this post.
www.bolsys.com.au

the original and the best
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

one more of the sliders and one of the front bar... these have been set up to mount the brush bars to and the exo which i will be doin in the next week or so for him....will put up finished pics when done.....

also we had to use the existing mounts the previous owner of his car had left on there for the sliders. :? . not ideal but made it all line up eventually.... :D the front bar has also been made to accomodate a winch and cradle at a later date
You do not have the required permissions to view the files attached to this post.
www.bolsys.com.au

the original and the best
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests