Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.3L Engine mods

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 185
Joined: Tue Dec 03, 2002 7:09 pm
Location: townsvile,nth qld

1.3L Engine mods

Post by camo »

Every one is talking about swaping engines and such.....

I was wondering if any one has tried to give the 1.3L some more curry with any sucess (or not)
different Cam shafts, extactors, weber carby... that sort of thing?

the simple stuff before going straight to the engine swap method!!

i am looking for a bit more go from the engine on the hi-way and was wondering if i need to go all the way and swap engines.

thanks
camo

(i am in Qld and it would be less hasle if i did not change the engine)
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

yeah i think you can hop it up some with bits from the 1.3 GTI engine
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

i have recently put on extractors an 2in exhaust
it helped a fair bit

can pull most hills in 5th gear(stock gearing)
with 31 in tyres
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Exhaust cam makes a remarkable difference. :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 185
Joined: Tue Dec 03, 2002 7:09 pm
Location: townsvile,nth qld

Post by camo »

sweet

i might be different and try that instead of an engine swap :lol: :lol:
thanks

any one tried the cam shaft suzisport is selling or one they could reccomened?

camo
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Camo I had my cam re-ground and I have been pretty happy with the results. It only cost about $70 or $80 .. so even if you are not happy it's not a real big cash outlay.

As for extractors .. If you do get me make sure that you get a flex joint installed at the end of the extractors or you will have issues with the exhust leaking at gaskets or my crack the exhast itself.

Guy
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 61 guests