Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Air Pressure Switch

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 469
Joined: Fri Sep 10, 2004 1:45 pm
Location: Melb

Air Pressure Switch

Post by sootygu »

Wondering were is the best and cheapest place to buy a pressure switch/relief valve for an air compressor set up. I have installed a Sanden 508 and want a switch that will cut of and relieve the pressure as well.

Prefer Melb suppliers but will try interstate if suitable.
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

Gasweld, $25.00 and dont forget a non return valve on the pump
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Post by HRZOOK »

Tiny wrote:Gasweld, $25.00 and dont forget a non return valve on the pump
Please explain :?

Also ARB switches are perfect fro lockers and are only $35 from most 4x4 shops
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

HRZOOK wrote:
Tiny wrote:Gasweld, $25.00 and dont forget a non return valve on the pump
Please explain
a 240v pressure switch from a toolex compressor (gasweld brand) and put a non return valve between the tank and pump so the pump doesn't have the constant back pressure
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

Get the bits from any compressor supplies place.

I got a pressure switch, relief valve, non-return valve (which I put on my tank), cheap gauge and some line for $50.


Regards
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests