Ive made a set of beadlock wheels to suit the steel Ozwheel 15" outer rings and can't get the steel rings anymore. I know they make an aluminium version of them but need to find out if the bolt P.C.D. and number of bolts is the same. The steel ones had 20 holes on a 347mm P.C.D. ( Pitch Cirle Diameter or if you draw a circle through the centre of all the bolt hole the diameter of that circle) Has anyone got a set of these beadlocks they can measure? I have contactated Ozwheel and i am waiting for them to get back to me.
Wally
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
OZWHEEL BEADLOCKS.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
OZWHEEL BEADLOCKS.
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
DAZ has steel ozwheels bead locks so either email him or if you have his number just give him a ring, if you don`t have his number then pm me and I`ll give it to ya.
When we picked his up from the ozwheels factory he showed us how he makes them and from memory the alloy and the steels ones were the same as you could bolt a steel ring to an alloy rim or vise versa. The outer steel ring was done in this huge arsed press.
The 16 beadlocks were made differently to the 15 ones.
When we picked his up from the ozwheels factory he showed us how he makes them and from memory the alloy and the steels ones were the same as you could bolt a steel ring to an alloy rim or vise versa. The outer steel ring was done in this huge arsed press.
The 16 beadlocks were made differently to the 15 ones.
Who is online
Users browsing this forum: No registered users and 2 guests