Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Weird Hiss

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 30
Joined: Fri Apr 08, 2005 7:55 am

Weird Hiss

Post by POIDA »

When I stop my D2 with SLS and get out I can hear a constant hissing sound for two minutes at least. At first I thought it was the SLS but now I think it's something else . On closer inspection I think it's coming from the engine block but it's always too hot too feel around when I get out. I though it may have been the head gasket. I released the cap from the cooling system to relieve presure and the hissing kept going. Tonight I shall try to locate the hiss further. What I was wondering is if anyone knew of the SLS hissing i.e. letting out air from the system after the car is stopped.
Posts: 55
Joined: Wed Mar 16, 2005 4:26 pm
Location: West Side O Melb

Post by green allycan »

have you got a TD5????????
Jog on then!
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

Vacume leak

Diesil Vac pump

petrol from brake booster.

fuel system blocked breather ect.

some ac s make a noice when vehicle is turned off.

few options.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 30
Joined: Fri Apr 08, 2005 7:55 am

Post by POIDA »

It's a V8 :armsup: , OK will check for vac leaks. Don't think it's aircon. Thanks boys. I guess the wierdest thing is I quickly went round and tried blocking the sound with my hand in different places. Now the only place the sound changed is when I put my hand near the exhaust manifold. Hence me thinking head gasket because my hand would be blocking the sound coming from the block. I will go around tonight with my ear on the end of a hose to try and locate it.
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

Its the bloody centrifugal oil filter spinning down!!!!!! its like a spin dryer and spins at high revs.
I have heard it often on a TD5.
Regards Philip A
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

Whoops, didn't read carefully enough.
I have never heard a V8 hiss, so I think is your SLS.
long shot. Injector leaking into manifold. Never heard it but could be.
Regards Philip A
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

The SLS is under the passengers seat bolted to the chassis though.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 30
Joined: Fri Apr 08, 2005 7:55 am

Post by POIDA »

Yeah it's not SLS. Still can't really locate it but I'm certain it's cooling system. Seems to be around the welsch plugs.
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

I feel a head gasket coming on. Puzzled that it did not stop when pressure released. Maybe leak from head/block join onto exhaust manifold???
Regards Philip A
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

I reckon it is the AC compressor - get a short bit of hose and start listening you will soon work it out

Tom
Posts: 30
Joined: Fri Apr 08, 2005 7:55 am

Post by POIDA »

Thanks for the replys people. In the end it turned out to be a breather on the drivers side at the firewall which I traced back under the car to the charcol canister. Now, the breather had fallen onto the exhaust and melted, then it fell down to rest on the chassis and it actually looked like it ran into the chassis rail. The melted end created a very small hole that obviously made a noise as the breather was breathing. Now I have a question for d2 V8 owners. Can you please tell me if you recognise this breather and whether is is supposed to have a one way valve built into it. If you look at the end of the breather it has a peice in it the had melted. I have cut the melted end off and it's now quiet. This piece looks like it may have had a check ball in it. I think the breather was supposed to sit where the other two small ones are in the first pic.
You do not have the required permissions to view the files attached to this post.
Last edited by POIDA on Thu Jun 23, 2005 7:32 pm, edited 1 time in total.
Posts: 30
Joined: Fri Apr 08, 2005 7:55 am

Post by POIDA »

sorry pics are the wrong way round.
Posts: 32
Joined: Wed Apr 21, 2004 6:47 pm
Location: Sydney,Australia

Post by Red Disco »

Geez, I thought you were showing pictures of my car then :cool: .

if i'm not mistaken those breathers are for your front diff and t/fer case or g/box. Maybe?

Not sure about the check ball though, I've never really noticed them much except to put them back in there clips :? .

George.
Posts: 30
Joined: Fri Apr 08, 2005 7:55 am

Post by POIDA »

The two in the first pic are breathers.
The other one in the second and third pics is the hisser. I think it goes to the purge canister and i think it iss a suction hiss. Perhaps there is supposed to be a filter on the end cuz it's vacuum
Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests