Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3l fault?

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

3l fault?

Post by plowy »

i have a mate who owns a 2000 hilux with a none turbo 3l motor the car has 200 000 km on it

he was drivin on road at about 60 and the eng made a noise as if the fan belt had let go and was flappin around the straight after that was a bang and the oil light on

he pulls over to find a large pool of oil on the ground and number 3 leg out of bed

question is ,is this a common fault with this motor has anyone herd of this happening

i know with most luxes its a prob to have number 4 big end knock .also this rig is service like clock work only mod the rig has is a set of 33 n hasn't been offroad in the last year at all any suggestions
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Timing belt let go?? Was it replaced at the correct interval, along with the tensioner and idler pulleys?
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

the timing belt was replaced at 70000km ago and all the pulleys that get the change over as well . he thought the enitial noise may have been it until the the hole was spotted

i thought the L series motor was a free spining motor ?
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Tidy42 wrote:the timing belt was replaced at 70000km ago and all the pulleys that get the change over as well . he thought the enitial noise may have been it until the the hole was spotted

i thought the L series motor was a free spining motor ?
definitely not. it's more or less impossible to build a free spinning diesel, especially indirect injected. throwing a rod isn't all that common but it does happen, the problem with early 2.8's (without HAC) is that they soot up their oil very quickly and thus provide inadequate big-end lubrication, the big end gets hot, expands and over-stretches the cap bolts. If the motor has ever gone more than 5000km between oil changes then it is susceptible. I guess it's too late for that motor but it's also cheap insurance to freshen the big end bearings every 100,000km and use a jap spec oil (high calcium).
Free air locker to the first 20 callers!
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Hi Dumbdunce
What does {without HAC} mean please
J Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

J Top wrote:Hi Dumbdunce
What does {without HAC} mean please
J Top
HAC = High Altitude Compensator - it winds back the fuel delivery in lower atmosphereic pressure to help minimise the soot in the oil. early 3L's didn't have one and tended to soot up their oil fairly quickly. there were a number of warranty claims because of it.
Free air locker to the first 20 callers!
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

so the moral here is service your 3L religiously or else?

im about 2000Km's overdue... :oops:
indubitably
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

De-lux wrote:so the moral here is service your 3L religiously or else?

im about 2000Km's overdue... :oops:
the later ones are less fussy, but any IDI diesel will thicken its oil if it's not changed regularly. a good test of sludgeness is to pop the rocker cover off and inspect - there should be no coating of black goo on the inside of the cover or on any of the head. if there is, run a few doses of oil flush stuff and do a few changes 500 - 1000km apart. expensive in oil and filters but cheaper than buying a new motor.
Free air locker to the first 20 callers!
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

well in retrospect im going to be fitting a new donk soon anyway, hopefully (1UZ-FE / commo V6 :twisted: )
indubitably
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

De-lux wrote:well in retrospect im going to be fitting a new donk soon anyway, hopefully (1UZ-FE / commo V6 :twisted: )
pfft conversion schmonversion. just go a dodgy home-brew turbo on the 3L, can be done for under $500 if you have welding skillz. Boost the daylights out of it and drive it to death, then when it's dead, do your converison :armsup:
Free air locker to the first 20 callers!
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

no, becuase if ii can fix the knock in the engine, i should be able to sell the engine and box for a bit hopefully... :D
indubitably
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

De-lux wrote:no, becuase if ii can fix the knock in the engine, i should be able to sell the engine and box for a bit hopefully... :D
DRIVE IT! :armsup:
Free air locker to the first 20 callers!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests