Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ticking noise when excelerating??????

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Ticking noise when excelerating??????

Post by Zam »

Hi Guys,

Just test drove a 91 lux 2.8 diesel and when excelerating anything past half throttle there was a ticking noise coming from what sounded like around the exhaust manifold.

Anyone have any suggestions on what this might be or whether it would be an expensive fix??????

You help appreciated.


Cheers


Zam
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

sounds like exaust to me, if so easy fix
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 131
Joined: Mon Aug 02, 2004 11:26 pm
Location: Perth, Western Australia

Post by DiStuRBeD »

Tiny wrote:sounds like exaust to me, if so easy fix
yep, sounds like exhaust gasket is gone
easy to fix, my last car tho it went 6-7 times
i broke the bolts on it so many times, :cry:

edit:
u could start it when the engine is cold and feel around it when reving

but if u just went in it as a once off well who cares
nothing better then a staghound stretching it out in full flight
Banned
Posts: 279
Joined: Wed Dec 15, 2004 7:26 pm

Post by HJ60_HEATHUS »

DiStuRBeD wrote:
Tiny wrote:sounds like exaust to me, if so easy fix
yep, sounds like exhaust gasket is gone
easy to fix, my last car tho it went 6-7 times
i broke the bolts on it so many times, :cry:
did you machine the manifold? blowing that many gaskets sounds like it's warped

also might be the flange gasket on the exhaust
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

if you're changing the exhaust manifold gasket you may as well do the flange at the same time.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

It can also be just a loose bolt but it can also be a loose gudgeon oin too

Check it out first
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

did you machine the manifold? blowing that many gaskets sounds like it's warped
Could need a bigger exhaust?? ;)
Where the f#@k did that come from
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

did you machine the manifold? blowing that many gaskets sounds like it's warped
Could need a bigger exhaust?? ;)
Where the f#@k did that come from
User avatar
Zam
Posts: 133
Joined: Tue Jun 03, 2003 3:48 pm
Location: Melbourne

Post by Zam »

Yeah, thanks guys, that's what Iw as thinking the exhaust gasket, will check that one out.

I most likely will be puchsingthis lux so will be able to give it a full check over, and yes a extractors and bigger exhaust will be on the cards, hahaha.

Anyways, what else should I be checking out apart from this ticking noise everything else seems solid, starts first time, no smoke, idles at 800 smooth gears changes no visible leaks, interior immaculate, no rust, body in very good condition.

it has only done 138000 for a 91 model which I think it very low.

So things are looking pretty good just waiting on the guy to get a RWC.
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

My mate had this problem and it turned out to be a loose gudgeon pin

Beefa
Post Reply

Who is online

Users browsing this forum: No registered users and 129 guests