Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Here is the site for the listing.
Note the reference to the Rocky. That is an aussie Rocky, not the USA Rocky. Also, it mentions only rear application. Front and rear diffs are the same on 1985 F75 Rocky, so they will fit both diffs. I know, I got em in both. http://www.tractech.com/App4.html
If you know any with Ferozas that would be great thanks!
I found an Australia wide wrecker site and posted a request on there too. But as already has been mentioned not many wreckers seem to have a grasp on websites and the need to check Email occasionally.
For the Engineers to design a Locker and reset machines to make them, they need to have a large 'run' of orders.
If we were lucky, we might be able to get about 50 or so people interested in getting one.....but that number is not enough to reset machines for such a small order.
Frank (Bitsamissin) has gone through this ordeal to get Air Lockers for the Pajero. See his thread in the Mitsu Section about the troubles and length of time taken to get as far as he has. Remember, there are a lot more Pajero's running round worldwide than there are Rocky's to have generated enough interest by ARB to design one.
)
